Skip to content
KORNDEX – Home
The KORNDEX range on the workbench: sanding discs, mesh, sheets, strips, a roll, sanding sponges, a hand sanding block and the random orbital sander

Finish sets Abrasives, accessories and machines – in every grit.

One product in the whole range matches your selection.

Not sure what you need? To the abrasive finder →

Related guides

Read first, then sand

Which grit, which sequence, which machine – explained in brief for the products above.

  • Masked vehicle in the body shop

    Car & paint

    What grit for clear coat? Wet sanding P1500 to P3000

    Matting before a respray, removing dust nibs and runs, finishing before polishing – three jobs, three grit ranges.

    P1500 → P2000

    Read · 3 min
  • Fine sanding plastic by hand with a foam sanding pad

    Plastic & resin

    Restoring headlights: which grit?

    Wet sand from P800 to P2000, then polish – and seal afterwards, or the lens will be cloudy again after one summer.

    P800 → P1000 → P1500 → P2000

    Read · 1 min
  • Wet sanding black paint with a foam sanding pad

    Car & paint

    Can you sand out scratches in car paint?

    Only scratches within the clear coat can be sanded out – wet with P1500 and P2000, then polish. How to check whether a scratch is too deep.

    P1500 → P2000

    Read · 2 min

FAQ

Questions about the products

Abrasives, accessories, a machine or a set – where do I start?

If you have a project ahead of you, the easiest start is a set: it contains the whole grit sequence from the first pass to the finished surface. If you already know what’s missing, filter by grit, size or machine. Accessories such as backing pads and interface pads depend on the diameter of your machine.

Which grit do I need?

Coarse (P24–P80) removes material, medium (P100–P180) shapes and levels, fine (P220–P400) smooths and prepares, very fine (P500–P1000) mattes paint, and ultra-fine (P1200 and up) is the finish before polishing. The grit guide explains every step; the abrasive finder tells you the grit for your project.

Grit guide →Abrasive finder →

Will the discs fit my random orbital sander?

Yes, if the diameter (125 or 150 mm) and the hook-and-loop fixing match. The multi-hole pattern fits any hole layout. Every product page lists under “Technical details” which machines the product is made for.

Machines →Abrasives →

Are there volume discounts?

Pack sizes are tiered: the bigger the pack, the lower the price per piece. Workshops, paint shops and businesses with regular demand get their own terms through KORNDEX Business – apply for a trade account and we’ll get back to you.

KORNDEX Business →

On shipping, invoices and returns: general shopping questions →