Backing pads, interface pads, hand blocks, masking tape, guide coat and dust masks – everything for the job, not just the abrasive.
6 products
Product type
The film
Backing pads, hand blocks, guide coat and dust masks – clean and safe.
Related guides
Why the disc no longer grips the backing pad, how sandpaper stays dry and flat, and how to keep edges straight with a hand block – explained in brief.
FAQ
Machine
What sits between machine and sanding disc: backing pads and interface pads, by diameter and hole pattern.
GuidesWhich backing pad for which abrasive?Goes with it
Mesh sanding disc Ø 150 mm – virtually dust-free, sands for longer.
€24.90
€0.50 / pc · incl. VAT, plus shipping
Foam sanding pad Ø 150 mm – perfect results. Every time.
€14.90
€1.49 / pc · incl. VAT, plus shipping
Hand blocks and sanding blocks for edges, profiles and small areas no machine can reach.
GuidesHand sanding: with a block, in strokes, criss-crossMask off what needs to stay intact, and see where more sanding is needed.
GuidesHow to avoid pigtails and sanding scratchesWhat keeps dust away from your lungs and eyes – masks and protective equipment for every sanding job.
GuidesSanding dust: extraction and masksAbrasives
How to store sandpaper properly
Moisture and heat make sandpaper curl and age the bond. Keep it dry, flat and in its packaging – and here’s why curled paper sands worse.
Read · 1 min
Sanders & technique
Sanding edges, profiles and curves
Where the random orbital sander can’t reach: hand block, sanding strips and non-woven abrasive – with a shaped block for profiles and without rounding over the edges.
Read · 2 minThree things have to match: the diameter (125 or 150 mm – the same as the discs), the mount – a 5/16" thread on most random orbital sanders, M8 on some – and the hole pattern for dust extraction. The KORNDEX pad has a 5/16" thread and multihole pattern, so it fits Festool, Mirka, Bosch Professional, Makita, Rupes and others with this mount. Your machine’s manual tells you which mount it has.
For paint, curves and edges, yes: the soft layer between backing pad and disc gives a little, follows contours and protects edges. On flat surfaces and for heavy stock removal you can do without. Under mesh discs use a pad with an open structure or matching holes so the dust is still extracted.
Usually it’s the backing pad, rarely the disc: its hook-and-loop wears out or gets clogged with dust. Clean clogged hook-and-loop with a soft brush or compressed air; if the hooks are flattened or discoloured, you need a new pad. To make it last: only switch the machine on once it’s on the surface and off before lifting it – an interface pad wears out instead of the backing pad.
Guide: when the hook-and-loop won’t hold →Hook-and-loop backing pad →
It shows where you haven’t sanded yet: applied thinly to body filler or primer surfacer, the black powder stays in pores, scratches and low spots and disappears wherever the surface is flat. Reapply after every grit change – only move on to the next grit once no powder is left.
Extract first, right at the machine – with a perforated backing pad and perforated or mesh discs. Whatever still rises is caught by a tight-fitting FFP2 dust mask. Oak and beech dust is classed as carcinogenic, and paint and filler dust has no place in your lungs either.
Dry, at room temperature, flat in the original packaging – not in a damp cellar, not next to a radiator. Moisture makes paper curl; curled discs don’t sit flat and come off the hook-and-loop more easily. Lay slightly curled sheets flat under a weight for a day.
On shipping, invoices and returns: general shopping questions →
Professional sanding disc Ø 150 mm – maximum stock removal.
€24.90
€0.50 / pc · incl. VAT, plus shipping
Goes with it
Sanding strips 70 × 420 mm with hook and loop – for hand blocks and orbital sanders.
€22.90
€0.92 / pc · incl. VAT, plus shipping
Sanding roll 115 mm × 25 m – maximum flexibility for hand sanding.
€34.90
€1.40 / m · incl. VAT, plus shipping
€249.00 / kg · incl. VAT, plus shipping
Goes with it
Film-backed sanding disc Ø 150 mm – for the finest surfaces.
€15.90
€1.59 / pc · incl. VAT, plus shipping