Mesh, paper or non-woven, which orbit, and when to use an interface pad.
With dust extraction on primer surfacer, body filler and primer, go for the mesh disc: dust passes straight through it everywhere, it doesn’t clog and stays sharp for longer. For heavy stock removal (P40 to P80) on wood and metal, paper cuts faster and costs less; from P800 a film disc is the better choice. Without extraction, mesh has no advantage.
Mesh or paper in the guide →
Non-woven mattes, paper removes material. Non-woven adapts to any shape and sands without deep scratches – ideal for scuff sanding paint in swage lines, corners and on edges where paper would sand through. For levelling and stock removal, paper remains the choice. A fine non-woven pad is roughly equivalent to P320 to P400.
Non-woven or paper in the guide →
Around 5 mm is the all-rounder: enough removal for body filler and wood, fine enough for paint prep. 2.5 to 3 mm is built for finishing – keying clear coat, before polishing – and 7 mm and more for fast stock removal. If you only have one machine, take 5 mm and use an interface pad for fine work.
3 or 5 mm orbit in the guide →Which sander? →
For paint, curves and edges, yes: the soft layer between backing pad and disc gives a little, follows contours and protects edges. On flat surfaces and for heavy stock removal you can do without. Under mesh discs use a pad with an open structure or matching holes so the dust is still extracted.
Interface pad in the glossary →Which backing pad fits? →
Yes, if the size fits: divide a 230 × 280 mm sheet into half, third or quarter sheets and clamp it tight. The paper has to cover the plate completely but must not overhang at the sides. On a hook-and-loop plate it needs a hook-and-loop back; the extraction holes are punched with the punch plate.
Sandpaper for the sheet sander →
Abrasive cloth carries the grain on fabric instead of paper. It is more tear-resistant and withstands pulling and creasing, which is why it is used in belts and rolls, mainly for metal. Paper is inexpensive, cuts well and comes from very coarse to fine.
What is sandpaper made of? →