Skip to content
KORNDEX – Home
The KORNDEX range on the workbench: sanding discs, mesh, sheets, strips, a roll, sanding sponges, a hand sanding block and the random orbital sander

Wet sanding abrasives for Plastic Abrasives, accessories and machines – in every grit.

One product in the whole range matches your selection.

Not sure what you need? To the abrasive finder →

Products – results

Related guides

Read first, then sand

Which grit, which sequence, which machine – explained in brief for the products above.

  • Fine sanding plastic by hand with a foam sanding pad

    Plastic & resin

    Restoring headlights: which grit?

    Wet sand from P800 to P2000, then polish – and seal afterwards, or the lens will be cloudy again after one summer.

    P800 → P1000 → P1500 → P2000

    Read · 1 min
  • Random orbital sander on the door of a black car

    Plastic & resin

    Sanding GRP: boats, motorhomes, body parts

    Keying gelcoat, levelling repairs, refining before paint: the sequence from P80 to P600 – and why the dust must stay out of your lungs.

    P80 → P120 → P180 → P240 → P320 → P400 → P600

    Read · 1 min
  • Sanding discs, sheets, a roll and sanding sponges next to a painted panel, wood, steel and plastic

    Plastic & resin

    Sanding 3D prints: grits to remove layer lines

    Layer lines on PLA, PETG and resin: coarse with P120 to P180, then up to P400 – and wet from P600 so the plastic doesn’t melt.

    P120 → P180 → P240 → P320 → P400 → P600 → P800

    Read · 1 min

FAQ

Questions about the products

Abrasives, accessories, a machine or a set – where do I start?

If you have a project ahead of you, the easiest start is a set: it contains the whole grit sequence from the first pass to the finished surface. If you already know what’s missing, filter by grit, size or machine. Accessories such as backing pads and interface pads depend on the diameter of your machine.

Which grit do I need?

Coarse (P24–P80) removes material, medium (P100–P180) shapes and levels, fine (P220–P400) smooths and prepares, very fine (P500–P1000) mattes paint, and ultra-fine (P1200 and up) is the finish before polishing. The grit guide explains every step; the abrasive finder tells you the grit for your project.

Grit guide →Abrasive finder →

Will the discs fit my random orbital sander?

Yes, if the diameter (125 or 150 mm) and the hook-and-loop fixing match. The multi-hole pattern fits any hole layout. Every product page lists under “Technical details” which machines the product is made for.

Machines →Abrasives →

Are there volume discounts?

Pack sizes are tiered: the bigger the pack, the lower the price per piece. Workshops, paint shops and businesses with regular demand get their own terms through KORNDEX Business – apply for a trade account and we’ll get back to you.

KORNDEX Business →

On shipping, invoices and returns: general shopping questions →