Interface pads Soft interface pad
Soft interface pad Ø 125 or 150 mm – for contours and for mesh discs.
Fits: Random orbital sander.
- Diameter:
- 125 / 150 mm
- Hole pattern:
- Multihole
€8.90
incl. VAT, plus shipping
In stock · Delivery 3–5 working days (DE) · free shipping from €49
Questions? Call: +49 (0) 6184 99 47 130- For curves and edges
- Lets dust through for mesh discs
- Hook and loop on both sides
Soft interface pad: technical details
- Diameter
- 125 / 150 mm
- Thickness
- 10 mm
- Hole pattern
- Multihole
- Machine
- Random orbital sander
Anything unclear – size, grit, machine? Ask a question about Soft interface pad
Soft interface pad: description
Between backing pad and disc: the 10 mm thick foam pad makes the hard backing pad soft for curves and edges – and lets the dust through with mesh discs. Hook and loop on both sides.
Helps against
All 2 variants as a table
| Item no. | Size | Price | Available |
|---|---|---|---|
| INTERFACE-PAD-150-1 | 125 mm | €8.90 | yes |
| INTERFACE-PAD-150-2 | 150 mm | €9.90 | yes |
Prices incl. VAT, plus shipping.
Soft interface pad in practice
- When
- When the backing pad is too hard for curves, with film and mesh discs, and wherever edges must not be sanded through.
- How to go about it
- Attach the pad to the backing pad, line up the holes and put the abrasive disc on the interface pad. Sand with a little less pressure than without it.
- Better something else
- For flat sanding on large surfaces, work without the interface pad – otherwise edges and transitions turn round.
- Tip from the workshop
- An interface pad with worn hook-and-loop is cheaper to replace than a backing pad – and it protects the backing pad as well.
Matching machines

Random orbital sander 150 mm, 5 mm orbit, 350 W – the machine for our discs.
€149.00
incl. VAT, plus shipping
Goes well with Soft interface pad
Mesh sanding disc Ø 150 mm – virtually dust-free, sands for longer.
€24.90
€0.50 / pc · incl. VAT, plus shipping
Foam sanding pad Ø 150 mm – perfect results. Every time.
€14.90
€1.49 / pc · incl. VAT, plus shipping
Hook-and-loop backing pad for random orbital sanders – 15 holes, 5/16" thread.
€18.60
incl. VAT, plus shipping
FAQ about Soft interface pad
Which sizes are available?
Soft interface pad comes in the sizes 150 mm and 125 mm.
Which machine does Soft interface pad fit?
Fits: Random orbital sander.
What has to match my machine?
Compare with your backing pad and machine: diameter 150 mm and hole pattern Multihole. If the hole pattern does not match the backing pad, the machine hardly extracts any dust.
Which size do I need?
The same diameter as backing pad and disc: a 150 mm pad on a 150 mm backing pad, a 125 mm pad on 125 mm. Smaller leaves the edge of the disc unsupported, larger overhangs the backing pad.
When should I use Soft interface pad?
When the backing pad is too hard for curves, with film and mesh discs, and wherever edges must not be sanded through. For flat sanding on large surfaces, work without the interface pad – otherwise edges and transitions turn round.
How do you use Soft interface pad?
Attach the pad to the backing pad, line up the holes and put the abrasive disc on the interface pad. Sand with a little less pressure than without it. An interface pad with worn hook-and-loop is cheaper to replace than a backing pad – and it protects the backing pad as well.
On shipping, invoices and returns: general shopping questions →
Guides for Soft interface pad
Product safety
Information under the EU General Product Safety Regulation (GPSR). What that means →
Manufacturer
Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de- Brand
- KORNDEX
- Product
- Soft interface pad · Interface pads
- Item numbers
- INTERFACE-PAD-150-1, INTERFACE-PAD-150-2
Warnings and safety information
Dust and eye protection
Sanding creates dust. Work with dust extraction; otherwise wear respiratory protection (at least FFP2) and safety glasses. Dust from wood, metal, paint and plastics can be harmful to health; old paints dating from before the 1990s may contain lead.
Matched to the machine
Only use backing pads and interface pads on machines with a matching fitting and diameter, and do not exceed the maximum speed stated on the machine. An oversized pad overhangs and strikes edges.
Check for wear
Inspect the hook-and-loop surface, hole pattern and fitting before you start. If the abrasive no longer holds securely, the surface is worn or the fitting has play: replace it. A disc that comes loose while running flies a long way.
By hand
Hand blocks and pads do not protect your hand from sharp edges and burrs on the workpiece. Wear gloves on metal and chipped paint – but not when sanding by machine, as they can get caught.


