Sanders & technique · 2 min read
Random orbital sander: 3 mm or 5 mm orbit?
A large orbit removes material, a small orbit refines. Which suits which job – and why 5 mm is the all-rounder.
Last updated: · published
KORNDEX sells abrasives – matching products are linked below the article.

What the orbit means
The orbit is the diameter of the small circular path the backing pad moves along in addition to rotating. The larger the orbit, the more material each movement removes – and the coarser the scratch pattern. A small orbit means less removal and a finer pattern.
How much orbit does a random orbital sander need?
Around 5 mm is the all-rounder: enough removal for body filler and wood, fine enough for paint preparation up to P400 and beyond. Large orbits of around 8 to 9 mm pay off if you mostly do coarse work. Small orbits of around 2.5 to 3 mm are built for finishing – keying clear coat, removing paint defects, before polishing.
If you only have one machine, take 5 mm, turn the speed down for fine work and put a soft interface pad under the disc.
How does a random orbital sander work?
The motor drives a shaft on which the pad sits off-centre – eccentrically. As a result the pad runs on a small circular path, the orbit, and rotates around itself at the same time. On most machines it rotates freely; gear-driven random orbital sanders force it to rotate via a gearbox and therefore remove more.
Orbit and rotation together give every grain an ever-changing path. So there is no directional scratch pattern as with a belt sander, and the scratches overlap into an evenly matt surface.
3 mm and 5 mm orbit compared
Removal: 3 mm low – 5 mm medium to high. Scratch pattern: 3 mm very fine – 5 mm fine. Use: 3 mm clear coat, paint defects, finish before polishing – 5 mm wood, body filler, primer surfacer, keying paint. Grits: 3 mm rather from P400 upwards – 5 mm from P80 to about P600.
FAQ
Which orbit for wood?
For wood usually 5 mm – fast removal on large surfaces. 3 mm for fine sanding and paint.
Terms in this article
- Orbit (stroke)
- Scratch pattern
- Clear coat
- Scuff sanding (keying)
- Speed
- Interface pad
- Belt sander
- Primer surfacer

