Skip to content
KORNDEX – Home
The KORNDEX range on the workbench: sanding discs, mesh, sheets, strips, a roll, sanding sponges, a hand sanding block and the random orbital sander

All products in P400 Abrasives, accessories and machines – in every grit.

4 products in the whole range match your selection.

P400 – Smoothing primer surfacer and primer, preparing for the top coat. All about P400 →

Not sure what you need? To the abrasive finder →

Products – results

  • SOFT FINISH

    P400KORNDEX
    Bestseller
    P400–P2000
    Grit
    150 mm
    Diameter
    10 pcs
    Contents
    €14.90

    €1.49 / pc · incl. VAT, plus shipping

  • PRO ROLL 115

    P400KORNDEX
    P80–P400
    Grit
    115 mm × 25 m
    Dimensions
    €34.90

    €1.40 / m · incl. VAT, plus shipping

  • PRO SHEET 230 × 280 wet

    P400KORNDEX
    P400–P2000
    Grit
    230 × 280 mm
    Dimensions
    25 pcs
    Contents
    €19.90

    €0.80 / pc · incl. VAT, plus shipping

  • PRO STRIP 70 × 420

    P400KORNDEX
    P80–P400
    Grit
    70 × 420 mm
    Dimensions
    25 pcs
    Contents
    €22.90

    €0.92 / pc · incl. VAT, plus shipping

Related guides

Read first, then sand

Which grit, which sequence, which machine – explained in brief for the products above.

  • Random orbital sander on grey primer surfacer on a masked car body

    Car & paint

    What grit before painting?

    Primer surfacer with P320 to P400, old paint with P400 to P600, plastic with P320 to P400 – depending on substrate and paint.

    P320 → P400 → P600

    Read · 2 min
  • Random orbital sander on a plastic bumper

    Plastic & resin

    What grit sandpaper for plastic? Preparing bumpers

    Bumpers and trim panels smear, warp and reject paint if you treat them like sheet metal. Grit, pressure and the steps that follow.

    P180 → P240 → P320 → P400

    Read · 2 min
  • Random orbital sander removing rust from a steel sheet

    Metal

    Sanding metal: which grit for rust, welds and paint?

    Removing rust and mill scale, dressing welds, keying bare metal for primer – which grit for what, and how to tell it is too coarse.

    P60 → P120 → P240 → P400

    Read · 3 min

FAQ

Questions about the products

Abrasives, accessories, a machine or a set – where do I start?

If you have a project ahead of you, the easiest start is a set: it contains the whole grit sequence from the first pass to the finished surface. If you already know what’s missing, filter by grit, size or machine. Accessories such as backing pads and interface pads depend on the diameter of your machine.

Which grit do I need?

Coarse (P24–P80) removes material, medium (P100–P180) shapes and levels, fine (P220–P400) smooths and prepares, very fine (P500–P1000) mattes paint, and ultra-fine (P1200 and up) is the finish before polishing. The grit guide explains every step; the abrasive finder tells you the grit for your project.

Grit guide →Abrasive finder →

Will the discs fit my random orbital sander?

Yes, if the diameter (125 or 150 mm) and the hook-and-loop fixing match. The multi-hole pattern fits any hole layout. Every product page lists under “Technical details” which machines the product is made for.

Machines →Abrasives →

Are there volume discounts?

Pack sizes are tiered: the bigger the pack, the lower the price per piece. Workshops, paint shops and businesses with regular demand get their own terms through KORNDEX Business – apply for a trade account and we’ll get back to you.

KORNDEX Business →

On shipping, invoices and returns: general shopping questions →