Skip to content
KORNDEX – Home

Fine · Smoothing and preparing

Sandpaper P400 P400 grit (FEPA)

Primer / paint. Smoothing primer surfacer and primer, preparing for the top coat.

Roughly equivalent to 320 Grit (US CAMI standard). Why the numbers differ

01 · Where it fits

Where P400 sits in the sequence

Before

Pre-sand with P320 – the jump to P400 is no more than double, so the scratches disappear.

Fine range

P220–P400: Intermediate sanding before oil, wax and varnish, smoothing primer surfacer and primer, paint preparation. The most-used group in any workshop.

After

Carry on with P600 until the surface is as fine as the next job needs.

P400 in practice

Used on
Primer before base coat, sealer, intermediate sanding of wood varnish.
Tools
Random orbital sander with 3 mm orbit or wet by hand with a sanding sheet.
Typical mistake
Leaving primer pimples: P400 does not hide them, and the base coat shows every single one.
Tip from the workshop
Under waterborne base coat, go over it once more with P500 – waterborne paints show sanding marks more readily than solvent-based ones.

P400 for wood and primer surfacer

On a car P400 is the grit for primer surfacer: P320 to P400 makes it smooth so the top coat lies flat on it. On wood P400 is a grit for the finish, not for bare wood – for sanding between fine coats of varnish or for wet-sanding an oiled table.

In the KORNDEX system:Paint preparation · Sand primer surfacer & primer P320–P600Paint preparation · Key paint & plastic P400–P1000Paint preparation · Fine-sand wood P240–P400

What P400 is used for

02 · Buy

Products in P400

  • PRO CUT 150

    P400KORNDEX
    Bestseller
    P80–P600
    Grit
    150 mm
    Diameter
    50 pcs
    Contents
    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • PRO FILM 150

    P400KORNDEX
    Bestseller
    P240–P1500
    Grit
    150 mm
    Diameter
    10 pcs
    Contents
    €15.90

    €1.59 / pc · incl. VAT, plus shipping

  • PRO NET 150

    P400KORNDEX
    Bestseller
    P80–P400
    Grit
    150 mm
    Diameter
    50 pcs
    Contents
    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • SOFT FINISH

    P400KORNDEX
    Bestseller
    P400–P2000
    Grit
    150 mm
    Diameter
    10 pcs
    Contents
    €14.90

    €1.49 / pc · incl. VAT, plus shipping

  • PRO CUT 125

    P400KORNDEX
    P60–P400
    Grit
    125 mm
    Diameter
    50 pcs
    Contents
    €19.90

    €0.40 / pc · incl. VAT, plus shipping

  • PRO ROLL 115

    P400KORNDEX
    P80–P400
    Grit
    115 mm × 25 m
    Dimensions
    €34.90

    €1.40 / m · incl. VAT, plus shipping

  • PRO SHEET 230 × 280 wet

    P400KORNDEX
    P400–P2000
    Grit
    230 × 280 mm
    Dimensions
    25 pcs
    Contents
    €19.90

    €0.80 / pc · incl. VAT, plus shipping

  • PRO STRIP 70 × 420

    P400KORNDEX
    P80–P400
    Grit
    70 × 420 mm
    Dimensions
    25 pcs
    Contents
    €22.90

    €0.92 / pc · incl. VAT, plus shipping

Sets with P400

  • Car paint starter set

    KORNDEXSTARTER SETKORNDEX
    Bestseller
    P120–P600
    Grit
    150 mm
    Diameter
    60 PRO CUT 150 discs
    Contents
    €69.90

    incl. VAT, plus shipping

03 · Know-how

FAQs about P400

What is P400 sandpaper used for?

Primer / paint: Smoothing primer surfacer and primer, preparing for the top coat. Typical for Car & paint, Metal, Plastic, Primer coat.

Is P400 coarse or fine?

P400 belongs to the fine range (P220 to P400): smoothing and preparing. The higher the number, the finer the grit.

Which grit comes after P400?

After P400 comes P500 or – from our range – P600. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.

Should P400 be used wet or dry?

Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P400 from clogging.

Which grit comes before P400?

Before P400, sand with P320 (or finer). Jump straight to P400 from too coarse a grit and you won't get the scratches out.

What do you sand P400 with?

Random orbital sander with 3 mm orbit or wet by hand with a sanding sheet. Typical for: Primer before base coat, sealer, intermediate sanding of wood varnish.

What is the most common mistake with P400?

Leaving primer pimples: P400 does not hide them, and the base coat shows every single one. Under waterborne base coat, go over it once more with P500 – waterborne paints show sanding marks more readily than solvent-based ones.

Related guides

  • Clear coat being wet-sanded by hand with a foam sanding pad

    Car & paint

    What grit sandpaper for car paint?

    From body filler to finish: the grit sequence for a paint repair – and why you never skip a step.

    P80 → P120 → P180 → P240 → P320 → P400 → P600

    Read · 4 min
  • Random orbital sander on grey primer surfacer on a masked car body

    Car & paint

    What grit before painting?

    Primer surfacer with P320 to P400, old paint with P400 to P600, plastic with P320 to P400 – depending on substrate and paint.

    P320 → P400 → P600

    Read · 2 min
  • Random orbital sander on the door of a black car

    Abrasives

    Sandpaper for random orbital sanders

    Diameter, hook-and-loop, hole pattern: what has to match – and which grits belong in the workshop.

    P80 → P120 → P180 → P240 → P320 → P400

    Read · 2 min

Not sure P400 is right?

The finder asks about material, machine and goal – and tells you the grit and product.

Start the abrasive finder →