Machines that match our abrasives – and for every machine the right discs, backing pads and interface pads, checked by machine type and diameter.
Step 1 · Machine
1 Machine
Random orbital sander 150 mm, 5 mm orbit, 350 W – the machine for our discs.
€149.00incl. VAT, plus shipping
Step 2 · Consumables
Abrasives, accessories and sets that fit the KORNDEX EX 150 – machine type and diameter checked.
Already included:Medium-hard backing pad · 10× PRO CUT P120
Discs in the matching diameter
Professional sanding disc Ø 150 mm – maximum stock removal.
€24.90
€0.50 / pc · incl. VAT, plus shipping
Step 3 · Know-how
Which machine for which job, which backing pad for what, and how to get the dust into the extractor instead of your lungs.
FAQ
A 5 mm orbit removes more material and is the all-rounder – from body filler and primer surfacer to keying before painting. A 3 mm orbit sands finer and is made for finishing. If you only have one machine, take 5 mm and switch to a finer grit and an interface pad for the finish.
The random orbital sander spins the round disc while oscillating in small circles: it removes more and leaves no directional scratch pattern – the choice for paint, filler and large wooden surfaces. The orbital sander with its square pad reaches into corners and along straight edges but sands more slowly. For the discs, diameter, hook and loop and a hole pattern that matches the backing pad are what count.
Random orbital sander · at a glance
Film-backed sanding disc Ø 150 mm – for the finest surfaces.
€15.90
€1.59 / pc · incl. VAT, plus shipping
Mesh sanding disc Ø 150 mm – virtually dust-free, sands for longer.
€24.90
€0.50 / pc · incl. VAT, plus shipping
Foam sanding pad Ø 150 mm – perfect results. Every time.
€14.90
€1.49 / pc · incl. VAT, plus shipping
Backing pads and interface pads
Soft interface pad Ø 125 or 150 mm – for contours and for mesh discs.
€8.90
incl. VAT, plus shipping
Hook-and-loop backing pad for random orbital sanders – 15 holes, 5/16" thread.
€18.60
incl. VAT, plus shipping
Complete grit sequences
Six grits for paint repair – from body filler to top coat.
€69.90
incl. VAT, plus shipping
For the finish before polishing – film, foam and wet sanding sheets.
€59.90
incl. VAT, plus shipping
Coarse, intermediate and fine sanding for furniture and solid wood.
€49.90
incl. VAT, plus shipping
Abrasives
Which backing pad for which abrasive?
Hard, medium or soft, with or without holes, with or without an interface pad – how to match the pad to the job.
Read · 2 min
Sanders & technique
Sanding dust: extraction and masks
Dust should be extracted before it ever reaches the air – and whatever still rises is caught by an FFP2 mask. Why this also makes your discs last longer.
Read · 2 minYes, if the diameter (125 or 150 mm) and the hook-and-loop fixing match. The multi-hole pattern fits any hole layout. Every product page lists under “Technical details” which machines the product is made for.
For paint, curves and edges, yes: the soft layer between backing pad and disc gives a little, follows contours and protects edges. On flat surfaces and for heavy stock removal you can do without. Under mesh discs use a pad with an open structure or matching holes so the dust is still extracted.
Extract first, right at the machine – with a perforated backing pad and perforated or mesh discs. Whatever still rises is caught by a tight-fitting FFP2 dust mask. Oak and beech dust is classed as carcinogenic, and paint and filler dust has no place in your lungs either.
On shipping, invoices and returns: general shopping questions →