Skip to content
KORNDEX – Home

Sanders & technique · 3 min read

Which sander for which job?

Random orbital, orbital, belt sander, angle grinder or by hand after all – what each machine does well and what it is not meant for.

Last updated: · published

KORNDEX sells abrasives – matching products are linked below the article.

Random orbital sander on the door of a black car

Random orbital sander: the all-rounder

The backing pad rotates and at the same time oscillates on a small circular path. This produces no directional scratch pattern – which is why the random orbital is the machine for paint, body filler and fine wood surfaces. The orbit defines its character: around 2.5 to 3 mm for fine finishing, about 5 mm as an all-round machine, 7 mm and more for fast stock removal.

For most workshops and DIYers, a 150 mm random orbital sander with a 5 mm orbit and dust extraction is the first machine to get.

Orbital and detail sanders

The rectangular or triangular plate only oscillates. It removes less than a random orbital sander but gets into corners and along edges – window frames, inside furniture, mouldings. You sand with strips or triangles instead of round discs.

Belt sander and angle grinder

The belt sander is made for heavy stock removal on wood: old floorboards, warped panels, thick layers of paint. It is too aggressive for paint and fine surfaces.

The angle grinder, with a flap disc or non-woven abrasive, belongs on metal: dressing welds, removing rust and mill scale. It has no business on wood, body filler or paint.

And by hand

No machine replaces hand sanding on edges, curves and small spots – or for wet sanding clear coat. A hand block with a flat face keeps the surface level; foam pads and non-woven abrasive follow contours.

Random orbital sander for large surfaces

For table tops, door leaves, bonnets and filled areas, the random orbital sander with a 150 mm pad and extraction is the right machine: it covers a lot of area and keeps it flat. On large surfaces work in long, overlapping passes, extraction on, change the disc in time. Long-reach sanders are built for whole walls and ceilings, floor sanding machines for parquet floors.

Random orbital sander, polisher or rotary sander?

A polisher drives a polishing pad, not a sanding disc: it brings back the gloss after sanding. Dual-action polishers look like random orbital sanders, but have a larger orbit and are tuned for polishing; they do not replace the sander.

A rotary sander only rotates the pad, with no orbital motion. It removes very aggressively and leaves circular scratches – the wrong choice on wood and paint. In between sits the gear-driven sander, which switches between random orbital and rotary motion.

Belt sander, orbital sander or random orbital sander?

The belt sander removes the most, sands in the direction of the belt and digs in quickly on the edge: for old floorboards, thick layers of paint and warped boards, not for paint finishes. The orbital sander removes little but gets into corners. The random orbital sander sits in between and is the better choice for most jobs.

Multi-sander or random orbital sander?

Multi-sanders have interchangeable plates – triangular, rectangular, round – and are meant for small jobs in corners. On surfaces they achieve far less than a random orbital sander. If you sand furniture and doors, take the random orbital sander and do the corners by hand; a multi-sander is worth it rather when there are very many corners and glazing bars.

FAQ

Do I need more than one sander as a DIYer?

Usually not. A 150 mm random orbital sander with a 5 mm orbit covers wood, paint and body filler. Corners and mouldings you can do by hand with a block and sanding strips.

Can I sand wood with an angle grinder?

With a flap or sanding disc, an angle grinder removes wood very quickly but leaves deep circular scratches and hollows. For rough work on beams it is fine; for furniture, doors and floors it is not – that is what the random orbital sander is for.

Terms in this article

All terms in the sanding glossary →

More on this topic

Matching products

  • KORNDEX EX 150 with extraction hose on the workbench, with P120, P240 and P400 sanding discs in front

    KORNDEX EX 150

    Random orbital sander 150 mm, 5 mm orbit, 350 W – the machine for our discs.

    €149.00

    incl. VAT, plus shipping

  • KORNDEX

    PRO STRIP 70 × 420

    Sanding strips 70 × 420 mm with hook and loop – for hand blocks and orbital sanders.

    €22.90

    €0.92 / pc · incl. VAT, plus shipping

  • KORNDEX

    Hand sanding block 70 × 198

    Hand sanding block with hook and loop and extraction port – for strips and rolls.

    €14.90

    incl. VAT, plus shipping

  • KORNDEX

    PRO FLEECE

    Abrasive fleece 152 × 229 mm – matting, cleaning and scuffing without scratches.

    €14.90

    €1.49 / pc · incl. VAT, plus shipping