Skip to content
KORNDEX – Home

Sanding problem

Carbon turns dull and frayed: the fibres have been sanded

Also: Carbon frays · CFRP sanded into · Dull visible carbon · Carbon weave showing

How do I notice that I am reaching the fibres on carbon? The sanding slurry turns darker and the weave pattern shows dull and rough. Stop at once – sanded weave can only be filled with new resin or clear coat.

How to spot it

The sanding slurry turns darker and the weave pattern shows dull and rough instead of shining under the paint.

Where it comes from

  • The top layer of resin or clear coat has been sanded through and the fibres underneath are reached.
  • The top layer is thinnest at edges and curves; that is where it happened first.

What helps now

  • Stop at once: sanded weave cannot be sanded away, only filled with new resin or clear coat.
  • In future sand only the top layer, by hand and with light pressure at edges and curves; use the machine only on flat areas.

Grits to put it right

Read the full sequence:Plastic

In depth in the guides:Sanding carbon fibre (CFRP): refreshing the clear coat without hitting the fibres

More sanding defects