Skip to content
KORNDEX – Home

Sanding problem

The filler repair shows through

Also: Filler is visible · Transition shows through · Filler edge in the paint

Why does the filler repair still show after painting? Because the transition remained a step or the primer surfacer is missing. Sand flat beyond the repair, feather the edge out wide and apply primer surfacer before painting.

How to spot it

An edge you can feel with the flat of your hand before you see it – after painting it shows as a shadow.

Where it comes from

  • Sanded only on the filler instead of well beyond it – the edge remains as a step.
  • A soft pad or bare hand followed the bump instead of levelling it.
  • No primer surfacer applied: the paint sinks into the fine scratches and pores.

What helps now

  • Sand flat with P80 on a hard, long block or a hard backing pad – always beyond the repair.
  • Feather the transition out flat with P120 and P180 – the wider, the less visible.
  • Remove the scratches of the previous steps with P240, then primer surfacer – it seals what the paint would otherwise trace.

Grits to put it right

Read the full sequence:Body filler Car & paint

In depth in the guides:Sanding a filler repair invisibly: feathering the edges What grit for sanding body filler?

More sanding defects