Skip to content
KORNDEX – Home

Sanding problem

The surface goes wavy, edges get rounded

Also: Dips from sanding · Uneven surface · Rounded edges

Why does my surface go wavy when sanding? Because the backing pad was tilted, stayed in one spot too long or a soft pad followed the bump. A hard backing pad or long block and overlapping passes keep the surface level.

How to spot it

Under raking light or with a long straightedge, shallow hollows show up; edges that should be crisp have gone soft.

Where it comes from

  • The backing pad was tilted or put down with the machine running.
  • Stayed in one spot for too long instead of working in overlapping passes.
  • A soft pad on a surface that needs to be flat – it follows the unevenness instead of removing it.

What helps now

  • Work flat: hard or medium backing pad, long hand sanding block for surfaces that need to be level.
  • Move slowly in overlapping passes, each pass covering half of the previous one.
  • Make hollows visible with guide coat – where it stays, you need filler, not more sanding.

Grits to put it right

Read the full sequence:Body filler Car & paint Wood

In depth in the guides:Using a random orbital sander: pressure, speed, pace Hand sanding: with a block, in strokes, criss-cross Sanding a filler repair invisibly: feathering the edges

More sanding defects