Sanding problem
Pigtails and arcs in the surface
Also: Swirl marks · Pigtails · Pigtails in the paint · Arcs from the random orbital sander
What causes swirl marks in the paint? Usually a skipped grit, too much pressure or dust under the disc. Go back to the coarse grit, work up in steps and check with guide coat before every change.
How to spot it
Small, even arcs, usually only visible under raking light or after painting.
Where it comes from
- A grit was skipped – the fine grit can no longer remove the deep scratches left by the coarse one.
- Too much pressure: the random orbit is braked, and the pad just spins instead of oscillating.
- Dust under the disc because there is no dust extraction or the disc is clogged.
What helps now
- Go back to the grit that caused the pigtails and work up in steps – never more than doubling the grit per step.
- Apply guide coat before every change: only move to the next grit once it has gone everywhere.
- Connect dust extraction, change the disc, let the weight of the machine do the work.
Read the full sequence:Car & paint Body filler
In depth in the guides:How to avoid pigtails and sanding scratches Using a random orbital sander: pressure, speed, pace