Skip to content
KORNDEX – Home

Very fine · Keying paint

Sandpaper P600 P600 grit (FEPA)

Paint preparation. Keying paint for a perfect finish before the top coat.

Roughly equivalent to 400 Grit (US CAMI standard). Why the numbers differ

01 · Where it fits

Where P600 sits in the sequence

Before

Pre-sand with P400 – the jump to P600 is no more than double, so the scratches disappear.

Very fine range

P500–P1000: Matting top coat and clear coat, preparing plastics for painting, sanding between coats.

After

Carry on with P800 until the surface is as fine as the next job needs.

P600 in practice

Used on
Old paint before repainting, blend-in zone, intermediate sanding of clear coat.
Tools
Random orbital sander with 3 mm orbit and an interface pad; abrasive fleece on edges.
Typical mistake
Missing glossy spots: wherever the surface is not matt, the new paint will not adhere.
Tip from the workshop
Check the surface under raking light. Everything has to be evenly matt – rework every glossy spot.

P600 wet or dry?

Both work. P600 is the boundary: up to here most sanding today is done dry with extraction, above it paint is mostly wet-sanded. Dry is faster and leaves no water on edges and metal; wet the grain does not clog and the scratch pattern becomes more even – use waterproof sheets or film discs for that.

Wet or dry sanding →

In the KORNDEX system:Paint preparation · Sand primer surfacer & primer P320–P600Paint preparation · Key paint & plastic P400–P1000

What P600 is used for

02 · Buy

Products in P600

  • PRO CUT 150

    P600KORNDEX
    Bestseller
    P80–P600
    Grit
    150 mm
    Diameter
    50 pcs
    Contents
    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • PRO FILM 150

    P600KORNDEX
    Bestseller
    P240–P1500
    Grit
    150 mm
    Diameter
    10 pcs
    Contents
    €15.90

    €1.59 / pc · incl. VAT, plus shipping

  • SOFT FINISH

    P600KORNDEX
    Bestseller
    P400–P2000
    Grit
    150 mm
    Diameter
    10 pcs
    Contents
    €14.90

    €1.49 / pc · incl. VAT, plus shipping

  • PRO SHEET 230 × 280 wet

    P600KORNDEX
    P400–P2000
    Grit
    230 × 280 mm
    Dimensions
    25 pcs
    Contents
    €19.90

    €0.80 / pc · incl. VAT, plus shipping

Sets with P600

  • Car paint starter set

    KORNDEXSTARTER SETKORNDEX
    Bestseller
    P120–P600
    Grit
    150 mm
    Diameter
    60 PRO CUT 150 discs
    Contents
    €69.90

    incl. VAT, plus shipping

03 · Know-how

FAQs about P600

What is P600 sandpaper used for?

Paint preparation: Keying paint for a perfect finish before the top coat. Typical for Car & paint, Plastic, Primer coat.

Is P600 coarse or fine?

P600 belongs to the very fine range (P500 to P1000): keying paint. The higher the number, the finer the grit.

Which grit comes after P600?

After P600 comes P800. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.

Should P600 be used wet or dry?

Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P600 from clogging.

Which grit comes before P600?

Before P600, sand with P400 (or finer). Jump straight to P600 from too coarse a grit and you won't get the scratches out.

What do you sand P600 with?

Random orbital sander with 3 mm orbit and an interface pad; abrasive fleece on edges. Typical for: Old paint before repainting, blend-in zone, intermediate sanding of clear coat.

What is the most common mistake with P600?

Missing glossy spots: wherever the surface is not matt, the new paint will not adhere. Check the surface under raking light. Everything has to be evenly matt – rework every glossy spot.

Related guides

  • Clear coat being wet-sanded by hand with a foam sanding pad

    Car & paint

    What grit sandpaper for car paint?

    From body filler to finish: the grit sequence for a paint repair – and why you never skip a step.

    P80 → P120 → P180 → P240 → P320 → P400 → P600

    Read · 4 min
  • Random orbital sander on grey primer surfacer on a masked car body

    Car & paint

    What grit before painting?

    Primer surfacer with P320 to P400, old paint with P400 to P600, plastic with P320 to P400 – depending on substrate and paint.

    P320 → P400 → P600

    Read · 2 min
  • Random orbital sander on a wing, sanding dust on the paint

    Plastic & resin

    Sanding and polishing epoxy resin

    River tables and castings: level coarse, then wet sand up to P2000 or P3000 and polish. Why the resin must be fully cured first.

    P120 → P180 → P240 → P320 → P400 → P600 → P800 → P1000 → P1500 → P2000

    Read · 1 min

Not sure P600 is right?

The finder asks about material, machine and goal – and tells you the grit and product.

Start the abrasive finder →