Skip to content
KORNDEX – Home

Fine · Smoothing and preparing

Sandpaper P320 P320 grit (FEPA)

Fine sanding. Fine surfaces, sanding primer surfacer, final corrections.

Roughly equivalent to 280 Grit (US CAMI standard). Why the numbers differ

01 · Where it fits

Where P320 sits in the sequence

Before

Pre-sand with P240 – the jump to P320 is no more than double, so the scratches disappear.

Fine range

P220–P400: Intermediate sanding before oil, wax and varnish, smoothing primer surfacer and primer, paint preparation. The most-used group in any workshop.

After

Carry on with P400 until the surface is as fine as the next job needs.

P320 in practice

Used on
Primer, wood varnish between coats, scuffing plastic.
Tools
Random orbital sander with 3 mm orbit, hand block for straight edges, foam pad on curves.
Typical mistake
Sanding through on edges: on body lines and edges the paint is thinner than on the flat surface.
Tip from the workshop
Do edges first by hand with the foam pad, then the surface with the machine – otherwise the machine tips over the edge.

P320 for wood

On bare wood P320 is usually too fine: the pores close and oil and stain soak in less well. P320 has its place between coats of varnish – a light sanding with P240 to P320 removes raised fibres and dust nibs so the next coat goes on smooth. And for wet-sanding the last coat of oil.

In the KORNDEX system:Paint preparation · Sand primer surfacer & primer P320–P600Paint preparation · Fine-sand wood P240–P400

What P320 is used for

02 · Buy

Products in P320

  • PRO CUT 150

    P320KORNDEX
    Bestseller
    P80–P600
    Grit
    150 mm
    Diameter
    50 pcs
    Contents
    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • PRO FILM 150

    P320KORNDEX
    Bestseller
    P240–P1500
    Grit
    150 mm
    Diameter
    10 pcs
    Contents
    €15.90

    €1.59 / pc · incl. VAT, plus shipping

  • PRO NET 150

    P320KORNDEX
    Bestseller
    P80–P400
    Grit
    150 mm
    Diameter
    50 pcs
    Contents
    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • PRO CUT 125

    P320KORNDEX
    P60–P400
    Grit
    125 mm
    Diameter
    50 pcs
    Contents
    €19.90

    €0.40 / pc · incl. VAT, plus shipping

  • PRO ROLL 115

    P320KORNDEX
    P80–P400
    Grit
    115 mm × 25 m
    Dimensions
    €34.90

    €1.40 / m · incl. VAT, plus shipping

  • PRO STRIP 70 × 420

    P320KORNDEX
    P80–P400
    Grit
    70 × 420 mm
    Dimensions
    25 pcs
    Contents
    €22.90

    €0.92 / pc · incl. VAT, plus shipping

Sets with P320

  • Car paint starter set

    KORNDEXSTARTER SETKORNDEX
    Bestseller
    P120–P600
    Grit
    150 mm
    Diameter
    60 PRO CUT 150 discs
    Contents
    €69.90

    incl. VAT, plus shipping

03 · Know-how

FAQs about P320

What is P320 sandpaper used for?

Fine sanding: Fine surfaces, sanding primer surfacer, final corrections. Typical for Car & paint, Wood, Metal, Plastic, Primer coat.

Is P320 coarse or fine?

P320 belongs to the fine range (P220 to P400): smoothing and preparing. The higher the number, the finer the grit.

Which grit comes after P320?

After P320 comes P400. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.

Should P320 be used wet or dry?

Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P320 from clogging.

Which grit comes before P320?

Before P320, sand with P240 (or finer). Jump straight to P320 from too coarse a grit and you won't get the scratches out.

What do you sand P320 with?

Random orbital sander with 3 mm orbit, hand block for straight edges, foam pad on curves. Typical for: Primer, wood varnish between coats, scuffing plastic.

What is the most common mistake with P320?

Sanding through on edges: on body lines and edges the paint is thinner than on the flat surface. Do edges first by hand with the foam pad, then the surface with the machine – otherwise the machine tips over the edge.

Related guides

  • Clear coat being wet-sanded by hand with a foam sanding pad

    Car & paint

    What grit sandpaper for car paint?

    From body filler to finish: the grit sequence for a paint repair – and why you never skip a step.

    P80 → P120 → P180 → P240 → P320 → P400 → P600

    Read · 4 min
  • Random orbital sander on grey primer surfacer on a masked car body

    Car & paint

    What grit before painting?

    Primer surfacer with P320 to P400, old paint with P400 to P600, plastic with P320 to P400 – depending on substrate and paint.

    P320 → P400 → P600

    Read · 2 min
  • Random orbital sander on the door of a black car

    Abrasives

    Sandpaper for random orbital sanders

    Diameter, hook-and-loop, hole pattern: what has to match – and which grits belong in the workshop.

    P80 → P120 → P180 → P240 → P320 → P400

    Read · 2 min

Not sure P320 is right?

The finder asks about material, machine and goal – and tells you the grit and product.

Start the abrasive finder →