Sanding problem
The disc flutters and tears at the edge
Also: Sanding disc frays · Disc tears at the edge · Disc flutters · Sanding disc overhangs
Why does the sanding disc tear at the edge? Usually because it is not exactly the size of the pad: one that is too large overhangs, flutters and tears at the edge. Disc and pad must have the same diameter.
How to spot it
The edge of the disc frays or tears, the disc flutters while sanding, or a ring of hook material is exposed.
Where it comes from
- The disc is larger than the pad: it overhangs, flutters and tears at the edge.
- The disc is smaller than the pad: a ring of hook material is exposed, rubs along, wears and drags scratches.
- An interface pad that is larger or smaller than the pad also tears at the edge.
What helps now
- Read the diameter on the pad or in the machine’s manual and take disc and interface pad in exactly that size.
- Place the disc in the centre, line up the holes and press down firmly for a moment.
- If the edge of the pad itself is frayed or the hook and loop no longer grips, replace the pad.
In depth in the guides:125 mm sanding discs: grit, hole pattern, hook and loop 6, 8 or 15 holes? Which hole pattern fits my backing pad? Interface pad: when an intermediate layer makes sense Random orbital sander pads not sticking? Causes and fixes