Sanding problem
Epoxy resin smears and clogs the disc
Also: Sticky epoxy · Resin smears · Epoxy not fully cured · Resin clogs sandpaper
Why does epoxy resin smear when sanded? Usually the resin is not fully cured yet – depending on resin and temperature that takes days. When in doubt test at a corner: it must make dust, not stick.
How to spot it
The resin does not make dust but smears, clogs every disc at once and tears scratches.
Where it comes from
- The epoxy is not fully cured; depending on resin and temperature that takes days.
- Epoxy gets warm when sanded: too much pressure or speed makes it softer.
What helps now
- Test at a corner: it must make dust, not stick. Otherwise let it cure longer.
- Light pressure, lower speed and extraction; wear an FFP2 mask against the fine dust.
In depth in the guides:Sanding and polishing epoxy resin When is a sanding disc worn out?