Skip to content
KORNDEX – Home

Sanding problem

The disc no longer cuts, it smears

Also: Sandpaper clogged · Disc loaded up · Disc no longer cuts

How do I know when to change the sanding disc? It cuts more slowly, the surface gets warm, and there are shiny patches or lumps on the disc. Just full of dust means clean it; rounded grains mean change it.

How to spot it

Same pressure, same speed – and still nothing happens; the surface gets warm, and there are shiny patches or lumps on the disc.

Where it comes from

  • Worked without dust extraction: the dust clogs the grains before they are blunt.
  • Paint or filler was not fully cured – soft material gums up any disc.
  • Too much pressure: the disc gets hot and smears.

What helps now

  • Clogged is not worn out: blow it out or clean it with an abrasive cleaning stick on the running machine.
  • If the grains are rounded or broken off and the surface is shiny, only a new disc will help.
  • Connect dust extraction; abrasive mesh extracts across the whole surface and clogs more slowly.

Read the full sequence:Car & paint Wood Body filler

In depth in the guides:When is a sanding disc worn out? Mesh sanding discs vs. regular sandpaper Sanding dust: extraction and masks

More sanding defects