Topic
Random orbital sanders: choosing, accessories, sanding discs
The random orbital sander is the machine for surfaces: paint, filler, wood. Here are the articles on choosing the machine, guiding it properly and the accessories that have to fit it.
Choosing the machine
- Buying a random orbital sander: what mattersPad size, stroke, dust extraction, connection and weight: six criteria for choosing a random orbital sander – without test winners and brand lists.
- Random orbital sander 125 mm or 150 mm – which pad?125 mm is small, light and gets to detail; 150 mm covers more with every pass and keeps large surfaces flatter. When which pad fits.
- Random orbital sander: 3 mm or 5 mm orbit?A large orbit removes material, a small orbit refines. Which suits which job – and why 5 mm is the all-rounder.
- Random orbital sander or orbital sander – which is better?The random orbital sander covers area, the orbital sander gets into corners. Motion, removal, abrasives and use compared – for wood, doors and drywall.
- Random orbital, sheet or detail sander: the comparisonRandom orbital for surfaces, sheet sander for frames and edges, detail sander for pointed corners: movement, stock removal, plate and use of the three machines side by side.
- Which sander for which job?Random orbital, orbital, belt sander, angle grinder or by hand after all – what each machine does well and what it is not meant for.
Guiding it properly
- Using a random orbital sander: pressure, speed, pacePut it down flat, then switch on, and let the weight of the machine do the work: the rules for an even scratch pattern without pigtails or dents.
- How to avoid pigtails and sanding scratchesP120 → P180 → P240 → P320
- Sanding dust: extraction and masksDust should be extracted before it ever reaches the air – and whatever still rises is caught by an FFP2 mask. Why this also makes your discs last longer.
Pad, interface pad and discs
- Which backing pad for which abrasive?Hard, medium or soft, with or without holes, with or without an interface pad – how to match the pad to the job.
- Interface pad: when an intermediate layer makes senseOn curves, on edges, with fine grits and with mesh discs. Why the intermediate layer makes the scratch pattern more even – and when to leave it out.
- Sandpaper for random orbital sandersP80 → P120 → P180 → P240 → P320 → P400
- 125 mm sanding discs: grit, hole pattern, hook and loopWhat the small disc is good for, which grit for which job, how to count the hole pattern on your pad – and why hook and loop and diameter have to match exactly.
- 6, 8 or 15 holes? Which hole pattern fits my backing pad?Hook and loop holds, holes extract. How to count the hole pattern on your pad, when multi-hole and mesh fit – and why you should not punch discs yourself.
- Random orbital sander pads not sticking? Causes and fixesUsually the hook-and-loop on the backing pad is worn or clogged – rarely the disc. How to tell, how to look after the pad and when an interface pad helps.