Skip to content
KORNDEX – Home
KORNDEX

Abrasive fleece PRO FLEECE

Abrasive fleece 152 × 229 mm – matting, cleaning and scuffing without scratches.

PRO FLEECE: Abrasive fleece for Car & paint, Wood, Plastic and Metal.

Use:
dry / wet

€14.90

incl. VAT, plus shipping · €1.49 / pc

Type
Quantity

The larger the pack, the cheaper: up to 10% less per piece.

In stock · Delivery 3–5 working days (DE) · free shipping from €49

How many pieces do you need?
Questions? Call: +49 (0) 6184 99 47 130
Compare with others

  • No scratches
  • For edges and swage lines
  • Doesn’t clog
  • Wet and dry

The film

Non-woven abrasives on film

No scratches – for edges and swage lines.

Find the right abrasives

PRO FLEECE: technical details

Dimensions
152 × 229 mm
Material
Nylon fleece with abrasive grain
Use
dry / wet
Machine
Hand sanding

Anything unclear – size, grit, machine? Ask a question about PRO FLEECE

PRO FLEECE: description

Fleece instead of paper: for scuffing paint on edges and swage lines, matting before painting, cleaning metal and denibbing wood. Three-dimensional – it sands without deep scratches and hardly clogs.

Good to know

  • Why non-woven?

    The abrasive grain sits in an open fibre web rather than on a rigid backing. Non-woven abrasive mattes evenly, leaves no deep scratches and gets into rebates, corners and profiles that a sheet cannot reach.

  • Sand wet?

    Water binds the dust, cools and flushes away the removed material – the scratch pattern gets finer and the abrasive does not clog. Squeegee the surface now and then to check the result.

    More in the guide: Sand wet?
All 6 variants as a table
All 6 variants of PRO FLEECE
Item no.TypeQuantityPriceAvailable
PRO-FLEECE-1fine (red)10 pcs€14.90€1.49 / pcyes
PRO-FLEECE-2fine (red)20 pcs€26.90€1.35 / pcyes
PRO-FLEECE-3very fine (grey)10 pcs€14.90€1.49 / pcyes
PRO-FLEECE-4very fine (grey)20 pcs€26.90€1.35 / pcyes
PRO-FLEECE-5ultra-fine (gold)10 pcs€14.90€1.49 / pcyes
PRO-FLEECE-6ultra-fine (gold)20 pcs€26.90€1.35 / pcyes

Prices incl. VAT, plus shipping.

PRO FLEECE in practice

When
For matting and scuffing where no disc can reach: edges, body lines, door handle recesses, plastic parts, and for cleaning metal.
How to go about it
Cut the fleece to suit the spot and move it over the surface with light pressure until no gloss is left – dry or with water.
Better something else
On large surfaces a disc in P600 to P800 is faster. For removing material, fleece is too gentle.
Tip from the workshop
A drop of scuffing paste or washing-up liquid makes the scratch pattern on paint even more uniform.

When to use it?

In the KORNDEX system:Paint preparation · Key paint & plastic P400–P1000

Complete sanding processes

Example: Car & paint – from the first pass to the finish.

Go to Car & paint

FAQ about PRO FLEECE

Which pack sizes are available?

PRO FLEECE comes in packs of 10 pcs and 20 pcs. The price per piece is shown with every pack.

Do I need a machine for PRO FLEECE?

No, PRO FLEECE is made for hand sanding.

Can PRO FLEECE be used wet?

Yes, PRO FLEECE can be used both dry and wet.

What is PRO FLEECE suitable for?

For Car & paint, Wood, Plastic and Metal.

When should I use PRO FLEECE?

For matting and scuffing where no disc can reach: edges, body lines, door handle recesses, plastic parts, and for cleaning metal. On large surfaces a disc in P600 to P800 is faster. For removing material, fleece is too gentle.

How do you use PRO FLEECE?

Cut the fleece to suit the spot and move it over the surface with light pressure until no gloss is left – dry or with water. A drop of scuffing paste or washing-up liquid makes the scratch pattern on paint even more uniform.

On shipping, invoices and returns: general shopping questions →

Guides for PRO FLEECE

  • Random orbital sander on a plastic bumper

    Plastic & resin

    What grit sandpaper for plastic? Preparing bumpers

    Bumpers and trim panels smear, warp and reject paint if you treat them like sheet metal. Grit, pressure and the steps that follow.

    P180 → P240 → P320 → P400

    Read · 2 min
  • Sanding sheet used by hand on a steel sheet

    Metal

    Keying and painting a radiator

    Spot-treat rust with P120, matt down the rest with P240 or abrasive fleece – and why you should keep the machine away from the fins.

    P120 → P180 → P240

    Read · 2 min
  • Sanding discs, sheets, a roll and sanding sponges next to a painted panel, wood, steel and plastic

    Abrasives

    Abrasive fleece or sandpaper?

    Fleece mattifies, paper removes. Where fleece does the better job – corners, edges, mouldings, keying before paint – and where it falls short.

    Read · 2 min

Product safety

Information under the EU General Product Safety Regulation (GPSR). What that means →

Manufacturer

Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de
Brand
KORNDEX
Product
PRO FLEECE · Abrasive fleece
Item numbers
PRO-FLEECE-1 to PRO-FLEECE-6 (all 6 in the item table)

Warnings and safety information

  • Dust and eye protection

    Sanding creates dust. Work with dust extraction; otherwise wear respiratory protection (at least FFP2) and safety glasses. Dust from wood, metal, paint and plastics can be harmful to health; old paints dating from before the 1990s may contain lead.

  • Fit and speed

    Only fit hook-and-loop abrasives centrally on an undamaged backing pad of the same size and line up the holes. Do not exceed the maximum permitted speed of the machine.

  • Damaged abrasives

    Do not use torn, creased or chipped abrasives – they can come loose while running. Check the hook-and-loop surface of the backing pad regularly as well.

  • Sparks and heat

    Sanding metal produces sparks and hot debris. Do not sand near solvents, paint residues or other flammable materials, and do not leave the contents of the dust bag standing open.

  • Wet or dry

    Only sand wet where the technical data state “Use: wet” or “wet and dry”. Mains-powered machines are not approved for wet sanding unless their manufacturer expressly permits it.