Skip to content
KORNDEX – Home

Sanding problem

Wood feels rough after the first coat

Also: Raised grain · Wood rough after varnish · Surface rough after oiling

Why is the wood rough again after the first coat of varnish? The finish raises the wood grain. Raise the grain with water before the final sand and lightly de-nib with P320 after the first coat – then the surface stays smooth.

How to spot it

The surface was sanded smooth and is rough again after the first coat.

Where it comes from

  • Water-based varnish or stain raises the wood grain.
  • Oil raises the grain too – after the first application.
  • Sanding dust was still in the pores and got sealed in.

What helps now

  • Raise the grain before the final sand: dampen the surface, let it dry, go over it with the final grit – then the finish will not raise the grain again.
  • Lightly de-nib between coats with P320 or fine non-woven abrasive – just scuff, do not sand through.
  • Vacuum the dust thoroughly, including from the pores, and wipe with a tack cloth.

Grits to put it right

Read the full sequence:Wood

In depth in the guides:Sanding wood before oil or varnish: which final grit? Pine, spruce, larch: sanding softwood

More sanding defects