Fine · Smoothing and preparing
Sandpaper P240 P240 grit (FEPA)
Fine sanding wood. Preparing for primer, fine sanding wood, smoothing metal.
Roughly equivalent to 220–240 Grit (US CAMI standard). Why the numbers differ
01 · Where it fits
Where P240 sits in the sequence
Before
Pre-sand with P180 – the jump to P240 is no more than double, so the scratches disappear.
Fine range
P220–P400: Intermediate sanding before oil, wax and varnish, smoothing primer surfacer and primer, paint preparation. The most-used group in any workshop.
After
Carry on with P320 until the surface is as fine as the next job needs.
P240 in practice
- Used on
- Primer and filler, wood before varnish, smoothing metal.
- Tools
- Random orbital sander with 3 mm orbit; mesh discs clog less in primer.
- Typical mistake
- Sanding primer too early: primer that has not fully cured smears and clogs the disc.
- Tip from the workshop
- Pre-sand primer dry with P240 and finish with P400 – the contour stays intact and the surface does not turn wavy.
P240 for wood, paint and metal
Wood: the last sanding before oil, wax or varnish – finer closes the pores and the wood absorbs less oil. Car: the last step on filler before primer surfacer; the surfacer fills the scratches of P240, not those of P80. Metal: smoothing and keying before primer – finer than P240 gives the primer less grip.
All grits in the Fine range
In the KORNDEX system:Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240Paint preparation · Fine-sand wood P240–P400
What P240 is used for
Car & paint
Sand body filler
Wood
Fine sanding · Between coats
Metal
Key metal · Refine the surface
Plastic
Remove scratches and burrs
Body filler
Feather the edges
02 · Buy
Products in P240
- Bestseller
- P80–P600
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- Bestseller
- P240–P1500
- Grit
- 150 mm
- Diameter
- 10 pcs
- Contents
€1.59 / pc · incl. VAT, plus shipping
- Bestseller
- P80–P400
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- P80–P400
- Grit
- 70 × 420 mm
- Dimensions
- 25 pcs
- Contents
€0.92 / pc · incl. VAT, plus shipping
Sets with P240
- Bestseller
- P120–P600
- Grit
- 150 mm
- Diameter
- 60 PRO CUT 150 discs
- Contents
incl. VAT, plus shipping
- P80–P240
- Grit
- 40 PRO CUT 150 discs, 25 PRO STRIP strips
- Contents
incl. VAT, plus shipping
03 · Know-how
FAQs about P240
What is P240 sandpaper used for?
Fine sanding wood: Preparing for primer, fine sanding wood, smoothing metal. Typical for Car & paint, Wood, Metal, Plastic, Body filler.
Is P240 coarse or fine?
P240 belongs to the fine range (P220 to P400): smoothing and preparing. The higher the number, the finer the grit.
Which grit comes after P240?
After P240 comes P320. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.
Should P240 be used wet or dry?
Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P240 from clogging.
Which grit comes before P240?
Before P240, sand with P180 (or finer). Jump straight to P240 from too coarse a grit and you won't get the scratches out.
What do you sand P240 with?
Random orbital sander with 3 mm orbit; mesh discs clog less in primer. Typical for: Primer and filler, wood before varnish, smoothing metal.
What is the most common mistake with P240?
Sanding primer too early: primer that has not fully cured smears and clogs the disc. Pre-sand primer dry with P240 and finish with P400 – the contour stays intact and the surface does not turn wavy.
Related guides
Not sure P240 is right?
The finder asks about material, machine and goal – and tells you the grit and product.
Start the abrasive finder →

