Skip to content
KORNDEX – Home

Sanding problem

Orange peel in fresh paint

Also: Orange peel in the clear coat · Wavy paint after spraying · Paint like orange skin · Dimples in the paint

How do I get orange peel out of the paint? Let it cure, then wet sand flat with P1000 or P1500 on a sanding block, refine with P2000 and polish. If the clear coat is not thick enough for that, only repainting helps.

How to spot it

Fine waves and dimples in the paint surface that distort the reflection – like the skin of an orange.

Where it comes from

  • Paint applied too thick or too dry, so it did not flow out any more.
  • Wrong temperature or thinner when spraying.
  • When sanding: a surface that was not flat follows the sanding and shows the dimples again after polishing.

What helps now

  • Let the paint cure first, then wet sand flat with P1000 or P1500 on a sanding block until no glossy dimples remain.
  • Refine wet with P2000 and polish.
  • Check beforehand in an inconspicuous spot whether the clear coat is thick enough – otherwise only repainting helps.

Grits to put it right

Read the full sequence:Car & paint

In depth in the guides:Sanding out orange peel, runs and dust nibs in paint What grit for clear coat? Wet sanding P1500 to P3000

More sanding defects