Medium · Shaping and levelling
Sandpaper P180 P180 grit (FEPA)
Feathering / filler. Level filled areas, feather edges into the old paint.
Roughly equivalent to 180 Grit (US CAMI standard).
01 · Where it fits
Where P180 sits in the sequence
Before
Pre-sand with P120 – the jump to P180 is no more than double, so the scratches disappear.
Medium range
P100–P180: The standard for rough and intermediate sanding on wood, for feathering filler edges and for keying metal. Removes the scratches left by coarse grits.
After
Carry on with P240 until the surface is as fine as the next job needs.
P180 in practice
- Used on
- Filler and primer transitions to the old paint, wood before stain, plastic parts in rough spots.
- Tools
- Random orbital sander with 3 mm orbit for fine transitions, interface pad on curves.
- Typical mistake
- Feathering the transition too narrow: the edge to the old paint shows up later as a ring.
- Tip from the workshop
- Feather transitions wide – a good two finger-widths beyond the filler edge, until you can no longer feel the edge with your fingertip.
180 is the grit, not the diameter
Anyone searching for "180 sandpaper" almost always means the grit P180. The diameter of a sanding disc is given separately in millimetres, such as 125 or 150 mm – and it matches the backing pad of the machine, not the grit. The number after the P only tells you how fine the grain is.
All grits in the Medium range
In the KORNDEX system:Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240
What P180 is used for
Car & paint
Sand body filler
Wood
Intermediate sanding · Fine sanding
Metal
Key metal
Plastic
Remove scratches and burrs
Body filler
Feather the edges
02 · Buy
Products in P180
- Bestseller
- P80–P600
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- Bestseller
- P80–P400
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- P80–P400
- Grit
- 70 × 420 mm
- Dimensions
- 25 pcs
- Contents
€0.92 / pc · incl. VAT, plus shipping
Sets with P180
- Bestseller
- P120–P600
- Grit
- 150 mm
- Diameter
- 60 PRO CUT 150 discs
- Contents
incl. VAT, plus shipping
- P80–P240
- Grit
- 40 PRO CUT 150 discs, 25 PRO STRIP strips
- Contents
incl. VAT, plus shipping
03 · Know-how
FAQs about P180
What is P180 sandpaper used for?
Feathering / filler: Level filled areas, feather edges into the old paint. Typical for Car & paint, Wood, Metal, Plastic, Body filler.
Is P180 coarse or fine?
P180 belongs to the medium range (P100 to P180): shaping and levelling. The higher the number, the finer the grit.
Which grit comes after P180?
After P180 comes P220 or – from our range – P240. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.
Should P180 be used wet or dry?
Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P180 from clogging.
Which grit comes before P180?
Before P180, sand with P120 (or finer). Jump straight to P180 from too coarse a grit and you won't get the scratches out.
What do you sand P180 with?
Random orbital sander with 3 mm orbit for fine transitions, interface pad on curves. Typical for: Filler and primer transitions to the old paint, wood before stain, plastic parts in rough spots.
What is the most common mistake with P180?
Feathering the transition too narrow: the edge to the old paint shows up later as a ring. Feather transitions wide – a good two finger-widths beyond the filler edge, until you can no longer feel the edge with your fingertip.
Related guides
Not sure P180 is right?
The finder asks about material, machine and goal – and tells you the grit and product.
Start the abrasive finder →

