Skip to content
KORNDEX – Home

Sanding problem

Dust nibs and runs in the paint

Also: Dust nibs in the paint · Paint sag · Runs in the clear coat · Bumps in the paint

Can you sand dust and runs out of the paint? Yes, if the paint is fully cured: remove only the raised part wet with a block (P1000 for a run, P1500 for a dust nib), blend with P2000 and polish.

How to spot it

Small bumps in the paint (dust) or ridges and drops (runs) that you can feel with a finger.

Where it comes from

  • Dust in the air or on the part when spraying.
  • Too much paint in one spot, which has run downwards.

What helps now

  • Let the paint cure; take down a run first with a small block and P1000 wet, only at the raised part.
  • Take a dust nib down with P1500 wet, only at the bump – do not dig it out.
  • Blend wet with P2000 and polish.

Grits to put it right

Read the full sequence:Car & paint

In depth in the guides:Sanding out orange peel, runs and dust nibs in paint Polishing paint after sanding: from P2000 to high gloss

More sanding defects