The heart of KORNDEX: abrasives for machine and hand sanding, for car & paint, wood, metal and plastics. Every product in clearly marked grits, in pack sizes for DIYers and workshops.
P180 – Level filled areas, feather edges into the old paint. All about P180 →
Grit
Related guides
Which grit, which sequence, which machine – explained in brief for the products above.
FAQ
Coarse (P24–P80) removes material, medium (P100–P180) shapes and levels, fine (P220–P400) smooths and prepares, very fine (P500–P1000) mattes paint, and ultra-fine (P1200 and up) is the finish before polishing. The grit guide explains every step; the abrasive finder tells you the grit for your project.
Never more than double the grit number: after P80 comes P120 or P150, not P240. Otherwise the scratches from the coarse grit stay visible – even more so under paint and oil.
Paper is the all-rounder for wood, body filler and metal. Mesh extracts dust across the whole surface and hardly clogs – ideal for body filler and primer surfacer. Film sands particularly evenly and copes with water, made for paint from P240. Foam hugs curves and does the finish up to P2000. Fleece mattes and cleans without scratches, even in corners and profiles.
Size
1 product
Wood
P80 for saw marks, P120 to P180 to smooth, P240 before oil and varnish – and why going finer than P240 often does harm.
P80 → P120 → P180 → P240
Read · 3 min
Metal
Sanding kerb damage on alloy wheels
Remove the burr with P120, feather the edges with P240, key with P400 before painting: this is how the rim edge gets smooth again – and when a wheel belongs in a specialist workshop.
P120 → P180 → P240 → P320 → P400
Read · 1 minYes, if the diameter (125 or 150 mm) and the hook-and-loop attachment match. The 150 mm discs with multihole pattern fit any hole pattern, the 125 mm discs have the usual 8-hole pattern; the mesh disc extracts across the whole surface anyway. Every product page shows under “Technical details” which machines the product is designed for.
Dry with dust extraction up to about P600 – faster and no water on the metal. From P800 on paint, wet sanding pays off: water cools, rinses away the swarf and gives a finer scratch pattern. Use waterproof sheets or film discs for this; paper discs go soft.
When it cuts noticeably slower, the surface gets warm, there are shiny patches or clumps of dust on the disc, or single deep scratches appear. It lasts longer with dust extraction, light pressure and the backing pad kept flat.
Gypsum filler on plasterboard is soft: P120 takes off ridges and trowel marks, P180 makes the surface ready to paint – finer brings nothing under wall paint. Do not sand into the paper facing of the boards, or it roughens up. Polyester body filler on a car is harder and starts at P80.
On shipping, invoices and returns: general shopping questions →