Topic
Sanding discs: diameter, hole pattern, hook and loop, backing
A sanding disc has to match the pad in diameter, hook and loop and hole pattern, and the job in the type of backing. The articles below go through each of these points.
Does it fit the pad?
- 125 mm sanding discs: grit, hole pattern, hook and loopWhat the small disc is good for, which grit for which job, how to count the hole pattern on your pad – and why hook and loop and diameter have to match exactly.
- 6, 8 or 15 holes? Which hole pattern fits my backing pad?Hook and loop holds, holes extract. How to count the hole pattern on your pad, when multi-hole and mesh fit – and why you should not punch discs yourself.
- Which backing pad for which abrasive?Hard, medium or soft, with or without holes, with or without an interface pad – how to match the pad to the job.
- Random orbital sander pads not sticking? Causes and fixesUsually the hook-and-loop on the backing pad is worn or clogged – rarely the disc. How to tell, how to look after the pad and when an interface pad helps.
Mesh, paper, film or fleece?
- Types of sandpaper: paper, mesh, film, foam, non-wovenPaper, mesh, film, foam and non-woven – what each type can do, what it is made for, and what emery paper, glasspaper and sanding screen have to do with it.
- Mesh sanding discs vs. regular sandpaperMesh extracts dust across its whole surface and does not clog; paper is cheaper and cuts harder. When to use which.
- Abrasive fleece or sandpaper?Fleece mattifies, paper removes. Where fleece does the better job – corners, edges, mouldings, keying before paint – and where it falls short.
Which grit?
- Sandpaper for random orbital sandersP80 → P120 → P180 → P240 → P320 → P400
- P240 or 240 grit? Converting grit scalesThe European P-grade (FEPA) and the American grit rating (CAMI) only match in the coarse range. From P240 onwards they drift apart – with a conversion table.
Changing and caring
- When is a sanding disc worn out?It stops biting, gets hot, leaves scratches: four signs the disc has to come off – and how to make it last longer.
- Cleaning clogged sandpaper – is it worth it?Knocking out, blowing out, using a cleaning stick or rinsing: what helps with clogged sandpaper – and when only a new disc will do.
- How to store sandpaper properlyMoisture and heat make sandpaper curl and age the bond. Keep it dry, flat and in its packaging – and here’s why curled paper sands worse.