Skip to content
KORNDEX – Home
GUIDEKORNDEX

Guide coat Guide coat powder

Black guide coat powder with applicator – shows where you haven’t sanded yet.

Guide coat powder: Guide coat for Car & paint, Primer coat and Body filler.

Use:
dry

€24.90

incl. VAT, plus shipping · €249.00 / kg

In stock · Delivery 3–5 working days (DE) · free shipping from €49

Questions? Call: +49 (0) 6184 99 47 130
Compare with others

  • Makes unevenness visible
  • Dry, no drying time
  • Reapply after every grit change

Guide coat powder – suitable for Car & paint, Primer coat, Body filler

Guide coat powder: technical details

Colour
black
Contents
100 g cartridge + applicator
Use
dry

Anything unclear – size, grit, machine? Ask a question about Guide coat powder

Guide coat powder: description

Apply thinly to body filler or primer surfacer before sanding: the powder stays in pores, scratches and low spots and disappears wherever the surface has been sanded flat. You see straight away where more work is needed – no water, no drying time.

Reapply after every grit change so the scratches from the previous grit show up too.

Guide coat powder in practice

When
Before every pass on filler and primer, to show dents, pores and the scratches of the previous grit.
How to go about it
Apply a thin coat with the applicator, sand until the powder has disappeared everywhere – and reapply after every grit change.
Better something else
On wood, pencil hatching tells you the same thing. On clear coat a film of water shows the scratch pattern.
Tip from the workshop
If the powder stubbornly stays in one spot, there is a dent – better to fill it again than to keep sanding.

Complete sanding processes

Example: Car & paint – from the first pass to the finish.

Go to Car & paint

Goes well with Guide coat powder

  • KORNDEX

    PRO NET 150

    Mesh sanding disc Ø 150 mm – virtually dust-free, sands for longer.

    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • KORNDEX

    PRO CUT 150

    Professional sanding disc Ø 150 mm – maximum stock removal.

    €24.90

    €0.50 / pc · incl. VAT, plus shipping

  • KORNDEX

    Soft interface pad

    Soft interface pad Ø 125 or 150 mm – for contours and for mesh discs.

    €8.90

    incl. VAT, plus shipping

FAQ about Guide coat powder

Can Guide coat powder be used wet?

No, Guide coat powder is made for dry sanding.

What is Guide coat powder suitable for?

For Car & paint, Primer coat and Body filler.

When should I use Guide coat powder?

Before every pass on filler and primer, to show dents, pores and the scratches of the previous grit. On wood, pencil hatching tells you the same thing. On clear coat a film of water shows the scratch pattern.

How do you use Guide coat powder?

Apply a thin coat with the applicator, sand until the powder has disappeared everywhere – and reapply after every grit change. If the powder stubbornly stays in one spot, there is a dent – better to fill it again than to keep sanding.

On shipping, invoices and returns: general shopping questions →

Guides for Guide coat powder

  • Random orbital sander on fresh body filler on a wing

    Car & paint

    How to avoid pigtails and sanding scratches

    Pigtails and scratches under the paint almost always have the same causes: a skipped grit, too much pressure, a clogged disc. How to keep the surface clean.

    P120 → P180 → P240 → P320

    Read · 1 min
  • Primer surfacer being wet-sanded with a foam sanding pad

    Abrasives

    Using guide coat properly: making unevenness visible

    Apply thinly, sand, check: where the powder stays, the surface is still uneven. How it shows defects and scratches at every grit change.

    Read · 1 min
  • Sanding discs, sheets, a roll and sanding sponges next to a painted panel, wood, steel and plastic

    Abrasives

    Abrasive fleece or sandpaper?

    Fleece mattifies, paper removes. Where fleece does the better job – corners, edges, mouldings, keying before paint – and where it falls short.

    Read · 2 min

Product safety

Information under the EU General Product Safety Regulation (GPSR). What that means →

Manufacturer

Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de
Brand
KORNDEX
Product
Guide coat powder · Guide coat
Item number
SCHLEIFKONTROLLE-1

Warnings and safety information

  • Avoid dust

    Do not inhale the powder or get it in your eyes; apply thinly and use extraction when sanding it off. Wash your hands after use.

  • Storage

    Store dry and closed, out of the reach of children. Do not decant into food containers.