Medium · Shaping and levelling
Sandpaper P120 P120 grit (FEPA)
Levelling. Level surfaces, shape body filler, key metal.
Roughly equivalent to 120 Grit (US CAMI standard).
01 · Where it fits
Where P120 sits in the sequence
Before
Pre-sand with P80 – the jump to P120 is no more than double, so the scratches disappear.
Medium range
P100–P180: The standard for rough and intermediate sanding on wood, for feathering filler edges and for keying metal. Removes the scratches left by coarse grits.
After
Carry on with P180 until the surface is as fine as the next job needs.
P120 in practice
- Used on
- Wood surfaces before intermediate sanding, shaping filler, steel before priming.
- Tools
- Random orbital sander with 5 mm orbit for surfaces, sanding roll or hand block for profiles.
- Typical mistake
- Pressing too hard: the grit breaks out, the disc gets hot and leaves swirl marks.
- Tip from the workshop
- Let the machine do the work – its own weight and light guidance are enough. More pressure only shortens the life of the disc.
P120 or P180?
Both, one after the other. P120 levels – after P80 or on planed wood, on filler and bare metal. P180 smooths the scratches of P120 and feathers edges. If you only take one: if the surface is still uneven or has saw marks, P120; if it is already flat and should become smooth before oil or varnish, P180. Going straight from P80 to P180 is more than doubling – the P120 in between saves time in the end.
All grits in the Medium range
In the KORNDEX system:Preparation · Remove old paint & rust P40–P120Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240
What P120 is used for
Car & paint
Sand body filler
Wood
Rough sanding · Intermediate sanding
Metal
Dress welds · Key metal
Body filler
Level the filler
02 · Buy
Products in P120
- Bestseller
- P80–P600
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- Bestseller
- P80–P400
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- P80–P400
- Grit
- 70 × 420 mm
- Dimensions
- 25 pcs
- Contents
€0.92 / pc · incl. VAT, plus shipping
Sets with P120
- Bestseller
- P120–P600
- Grit
- 150 mm
- Diameter
- 60 PRO CUT 150 discs
- Contents
incl. VAT, plus shipping
- P80–P240
- Grit
- 40 PRO CUT 150 discs, 25 PRO STRIP strips
- Contents
incl. VAT, plus shipping
03 · Know-how
FAQs about P120
What is P120 sandpaper used for?
Levelling: Level surfaces, shape body filler, key metal. Typical for Car & paint, Wood, Metal, Body filler.
Is P120 coarse or fine?
P120 belongs to the medium range (P100 to P180): shaping and levelling. The higher the number, the finer the grit.
Which grit comes after P120?
After P120 comes P150 or – from our range – P180. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.
Should P120 be used wet or dry?
Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P120 from clogging.
Which grit comes before P120?
Before P120, sand with P80 (or finer). Jump straight to P120 from too coarse a grit and you won't get the scratches out.
What do you sand P120 with?
Random orbital sander with 5 mm orbit for surfaces, sanding roll or hand block for profiles. Typical for: Wood surfaces before intermediate sanding, shaping filler, steel before priming.
What is the most common mistake with P120?
Pressing too hard: the grit breaks out, the disc gets hot and leaves swirl marks. Let the machine do the work – its own weight and light guidance are enough. More pressure only shortens the life of the disc.
Related guides
Not sure P120 is right?
The finder asks about material, machine and goal – and tells you the grit and product.
Start the abrasive finder →

