Coarse · Heavy stock removal
Sandpaper P80 P80 grit (FEPA)
Heavy stock removal. Remove old coatings, level body filler, rough sanding on wood.
Roughly equivalent to 80 Grit (US CAMI standard).
01 · Where it fits
Where P80 sits in the sequence
Before
Pre-sand with P60 – the jump to P80 is no more than double, so the scratches disappear.
Coarse range
P24–P80: Strip old paint, rust and rough unevenness, shape body filler. Leaves visible scratches – always work finer afterwards.
After
Carry on with P120 until the surface is as fine as the next job needs.
P80 in practice
- Used on
- Polyester filler on car bodies, wood after stock removal, rusty steel.
- Tools
- 150 mm random orbital sander with 5 mm orbit and dust extraction; mesh discs clog less in filler.
- Typical mistake
- Jumping straight from P80 to P240: the P80 scratches remain and show through the paint later.
- Tip from the workshop
- Sand filler with P80 only to just above level and finish with P120 to P180 – that way you do not sand edges into the panel.
P80 for wood, paint and filler
On wood P80 removes saw marks and greyed layers, on paint it strips old coatings, on a car it shapes polyester filler. In all three cases: P80 leaves scratches that only the next grit removes – after P80 comes P120, not P180 or P240.
All grits in the Coarse range
In the KORNDEX system:Preparation · Remove old paint & rust P40–P120Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240
What P80 is used for
Car & paint
Sand body filler
Wood
Strip paint · Rough sanding
Metal
Remove rust · Dress welds
Body filler
Level the filler
02 · Buy
Products in P80
- Bestseller
- P80–P600
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- Bestseller
- P80–P400
- Grit
- 150 mm
- Diameter
- 50 pcs
- Contents
€0.50 / pc · incl. VAT, plus shipping
- P80–P400
- Grit
- 70 × 420 mm
- Dimensions
- 25 pcs
- Contents
€0.92 / pc · incl. VAT, plus shipping
Sets with P80
- P80–P240
- Grit
- 40 PRO CUT 150 discs, 25 PRO STRIP strips
- Contents
incl. VAT, plus shipping
03 · Know-how
FAQs about P80
What is P80 sandpaper used for?
Heavy stock removal: Remove old coatings, level body filler, rough sanding on wood. Typical for Car & paint, Wood, Metal, Body filler.
Is P80 coarse or fine?
P80 belongs to the coarse range (P24 to P80): heavy stock removal. The higher the number, the finer the grit.
Which grit comes after P80?
After P80 comes P100 or – from our range – P120. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.
Should P80 be used wet or dry?
Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P80 from clogging.
Which grit comes before P80?
Before P80, sand with P60 (or finer). Jump straight to P80 from too coarse a grit and you won't get the scratches out.
What do you sand P80 with?
150 mm random orbital sander with 5 mm orbit and dust extraction; mesh discs clog less in filler. Typical for: Polyester filler on car bodies, wood after stock removal, rusty steel.
What is the most common mistake with P80?
Jumping straight from P80 to P240: the P80 scratches remain and show through the paint later. Sand filler with P80 only to just above level and finish with P120 to P180 – that way you do not sand edges into the panel.
Related guides
Not sure P80 is right?
The finder asks about material, machine and goal – and tells you the grit and product.
Start the abrasive finder →

