The heart of KORNDEX: abrasives for machine and hand sanding, for car & paint, wood, metal and plastics. Every product in clearly marked grits, in pack sizes for DIYers and workshops.
P1000 – Clear coat before recoating, fine sanding plastics. All about P1000 →
Compared
2 abrasives side by side – type, backing, hole pattern, use, grits, machine and price.
€1.59 / pc
€1.49 / pc
Related guides
Which grit, which sequence, which machine – explained in brief for the products above.
FAQ
Coarse (P24–P80) removes material, medium (P100–P180) shapes and levels, fine (P220–P400) smooths and prepares, very fine (P500–P1000) mattes paint, and ultra-fine (P1200 and up) is the finish before polishing. The grit guide explains every step; the abrasive finder tells you the grit for your project.
Never more than double the grit number: after P80 comes P120 or P150, not P240. Otherwise the scratches from the coarse grit stay visible – even more so under paint and oil.
Paper is the all-rounder for wood, body filler and metal. Mesh extracts dust across the whole surface and hardly clogs – ideal for body filler and primer surfacer. Film sands particularly evenly and copes with water, made for paint from P240. Foam hugs curves and does the finish up to P2000. Fleece mattes and cleans without scratches, even in corners and profiles.
Coarse
Ultra-fine
Application
Machine
2 products
€1.59 / pc · incl. VAT, plus shipping
€1.49 / pc · incl. VAT, plus shipping
Prices incl. VAT, plus shipping.
Plastic & resin
Sanding and polishing epoxy resin
River tables and castings: level coarse, then wet sand up to P2000 or P3000 and polish. Why the resin must be fully cured first.
P120 → P180 → P240 → P320 → P400 → P600 → P800 → P1000 → P1500 → P2000
Read · 1 min
Metal
Sanding and polishing brass and copper
Soft non-ferrous metals: patina with non-woven abrasive, scratches off with P240, then wet up to P2000 and polish – and why you seal it afterwards.
P240 → P400 → P600 → P1000 → P1500 → P2000
Read · 1 minYes, if the diameter (125 or 150 mm) and the hook-and-loop attachment match. The 150 mm discs with multihole pattern fit any hole pattern, the 125 mm discs have the usual 8-hole pattern; the mesh disc extracts across the whole surface anyway. Every product page shows under “Technical details” which machines the product is designed for.
Dry with dust extraction up to about P600 – faster and no water on the metal. From P800 on paint, wet sanding pays off: water cools, rinses away the swarf and gives a finer scratch pattern. Use waterproof sheets or film discs for this; paper discs go soft.
When it cuts noticeably slower, the surface gets warm, there are shiny patches or clumps of dust on the disc, or single deep scratches appear. It lasts longer with dust extraction, light pressure and the backing pad kept flat.
Gypsum filler on plasterboard is soft: P120 takes off ridges and trowel marks, P180 makes the surface ready to paint – finer brings nothing under wall paint. Do not sand into the paper facing of the boards, or it roughens up. Polyester body filler on a car is harder and starts at P80.
On shipping, invoices and returns: general shopping questions →