Soft/foam abrasives SOFT FINISH
Foam sanding pad Ø 150 mm – perfect results. Every time.
SOFT FINISH: Soft/foam abrasives for Car & paint, Wood and Plastic. Fits: Random orbital sander. Grits: P400 to P2000.
- Diameter:
- 150 mm
- Attachment:
- Hook and loop
- Hole pattern:
- none
- Use:
- dry / wet
- Abrasive grain:
- Aluminium oxide on foam
€14.90
incl. VAT, plus shipping · €1.49 / pc
In stock · Delivery 3–5 working days (DE) · free shipping from €49
How many pieces do you need?
- Adapts to contours
- No sand-through on edges
- Dry and wet
- Even scratch pattern
The film
Foam abrasives on film
Adapts to contours – no sand-through on edges.
SOFT FINISH – suitable for Car & paint, Wood, Plastic
SOFT FINISH: which grit for which finish?
The grits of this product and what they are typically used for. From heavy stock removal to a perfect surface.
Your next sanding step: After P800 comes P1000 – available in this product.
SOFT FINISH: technical details
- Diameter
- 150 mm
- Attachment
- Hook and loop
- Hole pattern
- none
- Abrasive grain
- Aluminium oxide on foam
- Thickness
- 5 mm
- Use
- dry / wet
- Machine
- Random orbital sander, Hand sanding
Terms explained
Anything unclear – size, grit, machine? Ask a question about SOFT FINISH
SOFT FINISH: description
The soft foam cushion adapts to edges and curves and spreads the pressure: no sand-through on edges, no shading. For the final sanding of clear coat, for plastic parts and for denibbing stained wood.
Wet or dry, on any hook-and-loop backing pad – no interface pad needed.
Good to know
Why foam?
The foam layer gives and follows curves, swage lines and edges. The pressure spreads out instead of building up at an edge – so you are less likely to sand through there.
Sand wet?
Water binds the dust, cools and flushes away the removed material – the scratch pattern gets finer and the abrasive does not clog. Squeegee the surface now and then to check the result.
More in the guide: Sand wet?
Helps against
All 12 variants as a table
| Item no. | Grit | Quantity | Price | Available |
|---|---|---|---|---|
| SOFT-FINISH-150-1 | P400 | 10 pcs | €14.90€1.49 / pc | yes |
| SOFT-FINISH-150-2 | P400 | 20 pcs | €27.90€1.40 / pc | yes |
| SOFT-FINISH-150-3 | P600 | 10 pcs | €14.90€1.49 / pc | yes |
| SOFT-FINISH-150-4 | P600 | 20 pcs | €27.90€1.40 / pc | yes |
| SOFT-FINISH-150-5 | P800 | 10 pcs | €14.90€1.49 / pc | yes |
| SOFT-FINISH-150-6 | P800 | 20 pcs | €27.90€1.40 / pc | yes |
| SOFT-FINISH-150-7 | P1000 | 10 pcs | €14.90€1.49 / pc | yes |
| SOFT-FINISH-150-8 | P1000 | 20 pcs | €27.90€1.40 / pc | yes |
| SOFT-FINISH-150-9 | P1500 | 10 pcs | €14.90€1.49 / pc | yes |
| SOFT-FINISH-150-10 | P1500 | 20 pcs | €27.90€1.40 / pc | yes |
| SOFT-FINISH-150-11 | P2000 | 10 pcs | €14.90€1.49 / pc | yes |
| SOFT-FINISH-150-12 | P2000 | 20 pcs | €27.90€1.40 / pc | yes |
Prices incl. VAT, plus shipping.
SOFT FINISH in practice
- When
- For the last pass on clear coat, for curves and edges, and anywhere a hard disc would sand through.
- How to go about it
- Put it straight onto the hook-and-loop pad, wet or dry, and sand in overlapping passes with little pressure.
- Better something else
- On large flat surfaces PRO FILM 150 gives an even flatter result. For dust nibs, work locally with a wet sheet on a hard block instead.
- Tip from the workshop
- No interface pad underneath: the pad is already soft – doubly soft rounds off the edges.
Complete sanding processes
Example: Car & paint – from the first pass to the finish.
Matching machines

Random orbital sander 150 mm, 5 mm orbit, 350 W – the machine for our discs.
€149.00
incl. VAT, plus shipping
Finish set for high gloss
For the finish before polishing – film, foam and wet sanding sheets.
- Ultra-fine grits
- Machine and hand
- Cheaper than buying separately
€59.90
incl. VAT, plus shipping
Goes well with SOFT FINISH
Film-backed sanding disc Ø 150 mm – for the finest surfaces.
€15.90
€1.59 / pc · incl. VAT, plus shipping
Hook-and-loop backing pad for random orbital sanders – 15 holes, 5/16" thread.
€18.60
incl. VAT, plus shipping
FAQ about SOFT FINISH
Which grits does SOFT FINISH come in?
SOFT FINISH comes in 6 grits: P400, P600, P800, P1000, P1500 and P2000.
Which pack sizes are available?
SOFT FINISH comes in packs of 10 pcs and 20 pcs. The price per piece is shown with every pack.
Which machine does SOFT FINISH fit?
Fits: Random orbital sander 150 mm – and can also be used by hand. Attachment: Hook and loop.
Can SOFT FINISH be used wet?
Yes, SOFT FINISH can be used both dry and wet.
What has to match my machine?
Compare with your backing pad and machine: diameter 150 mm and attachment Hook and loop.
How can I tell the disc is worn out?
When it cuts noticeably slower, the surface gets warm, glossy spots or lumps of dust sit on the disc, or single deep scratches appear. Change it then – not only when it tears.
What is SOFT FINISH suitable for?
For Car & paint, Wood and Plastic.
When should I use SOFT FINISH?
For the last pass on clear coat, for curves and edges, and anywhere a hard disc would sand through. On large flat surfaces PRO FILM 150 gives an even flatter result. For dust nibs, work locally with a wet sheet on a hard block instead.
How do you use SOFT FINISH?
Put it straight onto the hook-and-loop pad, wet or dry, and sand in overlapping passes with little pressure. No interface pad underneath: the pad is already soft – doubly soft rounds off the edges.
On shipping, invoices and returns: general shopping questions →
Guides for SOFT FINISH
Product safety
Information under the EU General Product Safety Regulation (GPSR). What that means →
Manufacturer
Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de- Brand
- KORNDEX
- Product
- SOFT FINISH · Soft/foam abrasives
- Item numbers
- SOFT-FINISH-150-1 to SOFT-FINISH-150-12 (all 12 in the item table)
Warnings and safety information
Dust and eye protection
Sanding creates dust. Work with dust extraction; otherwise wear respiratory protection (at least FFP2) and safety glasses. Dust from wood, metal, paint and plastics can be harmful to health; old paints dating from before the 1990s may contain lead.
Fit and speed
Only fit hook-and-loop abrasives centrally on an undamaged backing pad of the same size and line up the holes. Do not exceed the maximum permitted speed of the machine.
Damaged abrasives
Do not use torn, creased or chipped abrasives – they can come loose while running. Check the hook-and-loop surface of the backing pad regularly as well.
Sparks and heat
Sanding metal produces sparks and hot debris. Do not sand near solvents, paint residues or other flammable materials, and do not leave the contents of the dust bag standing open.
Wet or dry
Only sand wet where the technical data state “Use: wet” or “wet and dry”. Mains-powered machines are not approved for wet sanding unless their manufacturer expressly permits it.


