Skip to content
KORNDEX – Home

Sanding problem

The wood turns blotchy when stained

Also: Uneven stain · Wood blotches when staining · Blotchy glaze · Wood does not take the stain

Why does wood turn blotchy when stained? Often it was sanded too fine: closed pores take the stain unevenly. Sand up to P180, along the grain, remove dust and test on an offcut first.

How to spot it

The stain or glaze soaks in unevenly: the surface looks lighter and blotchy, and streaks show.

Where it comes from

  • Sanded too fine: the wood has closed pores and takes up less colour – which is why P180 is the upper limit.
  • Softwood with soft and hard streaks is particularly sensitive to uneven sanding.
  • Scratches across the grain or from a skipped grit only show after staining.

What helps now

  • Sand up to P180, no finer, always along the grain and without skipping a step.
  • Remove dust thoroughly, including from the pores; with water-based stain dampen the wood first and lightly sand raised fibres with P180.
  • Before staining, test on an offcut how the wood takes the colour.

Grits to put it right

Read the full sequence:Wood

In depth in the guides:Staining and glazing wood: which grit to sand to Pine, spruce, larch: sanding softwood What grit sandpaper for wood?

More sanding defects