Skip to content
KORNDEX – Home

Sanding problem

Acrylic edge turns cloudy again after polishing

Also: Plexiglas edge cloudy · Milky acrylic · Polish only covers scratches · Acrylic stress cracks

Why does the acrylic edge turn cloudy again after polishing? Usually scratches from a coarse step are still underneath, which the polish only covered. Go back one step, sand through cleanly, then polish again.

How to spot it

The polished edge or surface looks cloudy again after a short time or shows fine lines.

Where it comes from

  • Scratches from a coarse step are still under the polish, which only covered them.
  • Acrylic heats up quickly when sanded, smears and gets stress cracks, especially at drilled holes.

What helps now

  • Go back one step, sand through cleanly – each step across the previous one – then polish again.
  • From P800 sand wet, working at low speed and without pressure.

Grits to put it right

Read the full sequence:Plastic

In depth in the guides:Sanding and polishing acrylic: edges and scratches Polishing paint after sanding: from P2000 to high gloss

More sanding defects