Ultra-fine · Finish before polishing
Sandpaper P3000 P3000 grit (FEPA)
Polish preparation. Right before polishing – hologram-free.
01 · Where it fits
Where P3000 sits in the sequence
Before
Pre-sand with P2000 – the jump to P3000 is no more than double, so the scratches disappear.
Ultra-fine range
P1200–P5000: Removing dust nibs, runs and paint defects, usually wet. Then polish – the scratches are so fine that the polish takes them out.
After
After the finest sanding comes polishing.
P3000 in practice
- Used on
- Black and dark paints, show finish, headlights before sealing.
- Tools
- Foam sanding pad on a random orbital sander, wet and with very little pressure.
- Typical mistake
- Using P3000 instead of coarser steps: it removes no defects, it only refines the scratch pattern.
- Tip from the workshop
- After P3000 a fine polish is often enough – it saves time and spares the clear coat.
Is there anything finer than P3000?
Yes – grits such as P4000 to P10000 exist as foam and polishing abrasives. They shorten polishing further but do not replace it. For a repair paint job P3000 is enough as the last sanding: the scratches are so fine that a cutting compound removes them.
All grits in the Ultra-fine range
In the KORNDEX system:Finish · Before polishing P2000–P3000
What P3000 is used for
Car & paint
Finish before polishing
02 · Buy
Products in P3000
We don't stock P3000 at the moment – the nearest available grit:
03 · Know-how
FAQs about P3000
What is P3000 sandpaper used for?
Polish preparation: Right before polishing – hologram-free. Typical for Car & paint.
Is P3000 coarse or fine?
P3000 belongs to the ultra-fine range (P1200 to P5000): finish before polishing. The higher the number, the finer the grit.
Which grit comes after P3000?
After P3000 you polish: the scratches are so fine that the polish takes them out.
Should P3000 be used wet or dry?
On paint usually wet: from P800 the water cools, flushes away the swarf and makes the scratch pattern finer and more even. Use waterproof sheets or film discs for this – paper goes soft. P3000 also works dry with dust extraction, but clogs faster.
Which grit comes before P3000?
Before P3000, sand with P2000 (or finer). Jump straight to P3000 from too coarse a grit and you won't get the scratches out.
What do you sand P3000 with?
Foam sanding pad on a random orbital sander, wet and with very little pressure. Typical for: Black and dark paints, show finish, headlights before sealing.
What is the most common mistake with P3000?
Using P3000 instead of coarser steps: it removes no defects, it only refines the scratch pattern. After P3000 a fine polish is often enough – it saves time and spares the clear coat.
Not sure P3000 is right?
The finder asks about material, machine and goal – and tells you the grit and product.
Start the abrasive finder →