Abrasives · 1 min read
Basic abrasives kit: which grits should always be in stock
With seven grits from P80 to P2000, mesh or paper, a sanding block and guide coat you cover wood, filler and paint. What else belongs in, depending on who you are.
Last updated:
KORNDEX sells abrasives – matching products are linked below the article.

The answer in one paragraph
For most jobs P80, P120, P180, P240, P400 and P800 are enough, plus P1500 and P2000 for wet sanding clear coat. Add a mesh or paper disc for the random orbital sander, a hand sanding block for edges, guide coat and masking tape.
Coarse to fine: what each grit is for
P80 removes filler, old paint and raw wood, P120 and P180 smooth, P240 prepares for primer and paint, P400 and P800 finish the paint preparation, P1500 and P2000 wet bring clear coat and finish to the state before polishing. The grit sequence is in the grit guide.
Car workshop, wood workshop, all-rounder
If you mostly work on car paint, you need P80 to P800 dry and P1500 to P2000 wet. If you mostly work on wood, P80 to P240 is enough and you add finer grits only for painting. An all-rounder keeps both ranges in small quantities.
Disc, block, pad: the backings
Discs for the random orbital sander cover the surface, the hand sanding block covers edges, profiles and places the machine cannot reach. Mesh discs clog less on primer and filler; film discs and foam pads are for the finish.
Check instead of guessing
Guide coat shows where you have not sanded yet and keeps you from changing grit too early. It costs little and saves rework.
FAQ
Which grits do I need at least?
P80, P120, P180, P240 and P400 for wood, filler and paint preparation; if you sand clear coat, add P800, P1500 and P2000 wet.
Are sets worth it?
A set covers a whole grit sequence and keeps a step from missing. If you only have one job, buy single packs.
Terms in this article
- Wet sanding
- Clear coat
- Random orbital sander
- Hand sanding block
- Guide coat (control powder)
- Primer surfacer
- Polishing
- Grit sequence

