Skip to content
KORNDEX – Home

Medium · Shaping and levelling

Sandpaper P100 P100 grit (FEPA)

Rough sanding. Remove saw marks on wood, the step up from P80.

Roughly equivalent to 100 Grit (US CAMI standard).

01 · Where it fits

Where P100 sits in the sequence

Before

Pre-sand with P80 – the jump to P100 is no more than double, so the scratches disappear.

Medium range

P100–P180: The standard for rough and intermediate sanding on wood, for feathering filler edges and for keying metal. Removes the scratches left by coarse grits.

After

Carry on with P120 until the surface is as fine as the next job needs.

P100 in practice

Used on
Raw wood with saw marks and planer chatter, reclaimed wood after coarse sanding.
Tools
Random orbital or orbital sander for surfaces, hand block for edges.
Typical mistake
Sanding across the grain by hand: scratches across the grain show clearly once the wood is oiled.
Tip from the workshop
Draw pencil hatching on the wood. When every line is gone, the surface is evenly sanded and P100 is done.

In the KORNDEX system:Preparation · Remove old paint & rust P40–P120Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240

What P100 is used for

02 · Buy

Products in P100

We don't stock P100 at the moment – the available grits either side:

The proven sequences work without P100:

Sets with the whole sequence around P100

  • Wood starter set

    KORNDEXSTARTER SETKORNDEX
    P80–P240
    Grit
    40 PRO CUT 150 discs, 25 PRO STRIP strips
    Contents
    €49.90

    incl. VAT, plus shipping

03 · Know-how

FAQs about P100

What is P100 sandpaper used for?

Rough sanding: Remove saw marks on wood, the step up from P80. Typical for Wood.

Is P100 coarse or fine?

P100 belongs to the medium range (P100 to P180): shaping and levelling. The higher the number, the finer the grit.

Which grit comes after P100?

After P100 comes P120. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.

Should P100 be used wet or dry?

Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P100 from clogging.

Which grit comes before P100?

Before P100, sand with P80 (or finer). Jump straight to P100 from too coarse a grit and you won't get the scratches out.

What do you sand P100 with?

Random orbital or orbital sander for surfaces, hand block for edges. Typical for: Raw wood with saw marks and planer chatter, reclaimed wood after coarse sanding.

What is the most common mistake with P100?

Sanding across the grain by hand: scratches across the grain show clearly once the wood is oiled. Draw pencil hatching on the wood. When every line is gone, the surface is evenly sanded and P100 is done.

Not sure P100 is right?

The finder asks about material, machine and goal – and tells you the grit and product.

Start the abrasive finder →