Skip to content
KORNDEX – Home

Medium · Shaping and levelling

Sandpaper P150 P150 grit (FEPA)

Intermediate sanding. Wood before fine sanding, feathering filler edges.

Roughly equivalent to 150 Grit (US CAMI standard).

01 · Where it fits

Where P150 sits in the sequence

Before

Pre-sand with P120 – the jump to P150 is no more than double, so the scratches disappear.

Medium range

P100–P180: The standard for rough and intermediate sanding on wood, for feathering filler edges and for keying metal. Removes the scratches left by coarse grits.

After

Carry on with P180 until the surface is as fine as the next job needs.

P150 in practice

Used on
Hardwood and softwood before fine sanding, filler transitions, MDF edges.
Tools
Random orbital or orbital sander; foam pad or abrasive fleece on curves.
Typical mistake
Not removing dust between grits: loose grains from P80 or P120 stay on the surface and cause new scratches.
Tip from the workshop
Vacuum before every grit change and wipe with a tack cloth – two minutes that save the fine sanding.

In the KORNDEX system:Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240

What P150 is used for

02 · Buy

Products in P150

We don't stock P150 at the moment – the available grits either side:

The proven sequences work without P150:

Sets with the whole sequence around P150

  • Car paint starter set

    KORNDEXSTARTER SETKORNDEX
    Bestseller
    P120–P600
    Grit
    150 mm
    Diameter
    60 PRO CUT 150 discs
    Contents
    €69.90

    incl. VAT, plus shipping

  • Wood starter set

    KORNDEXSTARTER SETKORNDEX
    P80–P240
    Grit
    40 PRO CUT 150 discs, 25 PRO STRIP strips
    Contents
    €49.90

    incl. VAT, plus shipping

03 · Know-how

FAQs about P150

What is P150 sandpaper used for?

Intermediate sanding: Wood before fine sanding, feathering filler edges. Typical for Wood.

Is P150 coarse or fine?

P150 belongs to the medium range (P100 to P180): shaping and levelling. The higher the number, the finer the grit.

Which grit comes after P150?

After P150 comes P180. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.

Should P150 be used wet or dry?

Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P150 from clogging.

Which grit comes before P150?

Before P150, sand with P120 (or finer). Jump straight to P150 from too coarse a grit and you won't get the scratches out.

What do you sand P150 with?

Random orbital or orbital sander; foam pad or abrasive fleece on curves. Typical for: Hardwood and softwood before fine sanding, filler transitions, MDF edges.

What is the most common mistake with P150?

Not removing dust between grits: loose grains from P80 or P120 stay on the surface and cause new scratches. Vacuum before every grit change and wipe with a tack cloth – two minutes that save the fine sanding.

Not sure P150 is right?

The finder asks about material, machine and goal – and tells you the grit and product.

Start the abrasive finder →