Skip to content
KORNDEX – Home

Fine · Smoothing and preparing

Sandpaper P220 P220 grit (FEPA)

Before oil and varnish. Wood before oil and varnish, first smoothing of primer.

Roughly equivalent to 220 Grit (US CAMI standard).

01 · Where it fits

Where P220 sits in the sequence

Before

Pre-sand with P180 – the jump to P220 is no more than double, so the scratches disappear.

Fine range

P220–P400: Intermediate sanding before oil, wax and varnish, smoothing primer surfacer and primer, paint preparation. The most-used group in any workshop.

After

Carry on with P240 until the surface is as fine as the next job needs.

P220 in practice

Used on
Wood before oil, wax or varnish, hardwood furniture, primer for a first smoothing.
Tools
Random orbital sander with 3 mm orbit or a hand block along the grain.
Typical mistake
Sanding wood too fine before oiling: from about P320 the pores close and the oil soaks in less well.
Tip from the workshop
Dampen the wood slightly before the last pass. Once dry, take off the raised fibres with P220 – then the varnish will not turn rough.

In the KORNDEX system:Preparation · Sand body filler P80–P240Preparation · Pre-sand and intermediate-sand wood P80–P240

02 · Buy

Products in P220

We don't stock P220 at the moment – the available grits either side:

The proven sequences work without P220:

Sets with the whole sequence around P220

  • Car paint starter set

    KORNDEXSTARTER SETKORNDEX
    Bestseller
    P120–P600
    Grit
    150 mm
    Diameter
    60 PRO CUT 150 discs
    Contents
    €69.90

    incl. VAT, plus shipping

  • Wood starter set

    KORNDEXSTARTER SETKORNDEX
    P80–P240
    Grit
    40 PRO CUT 150 discs, 25 PRO STRIP strips
    Contents
    €49.90

    incl. VAT, plus shipping

03 · Know-how

FAQs about P220

What is P220 sandpaper used for?

Before oil and varnish: Wood before oil and varnish, first smoothing of primer.

Is P220 coarse or fine?

P220 belongs to the fine range (P220 to P400): smoothing and preparing. The higher the number, the finer the grit.

Which grit comes after P220?

After P220 comes P240. Never more than double the number per step – that way the finer grit removes the scratches of the coarser one.

Should P220 be used wet or dry?

Dry, with dust extraction – up to about P600 that is the standard today: faster, and no water in the metal or wood. Mesh discs and multi-hole patterns stop P220 from clogging.

Which grit comes before P220?

Before P220, sand with P180 (or finer). Jump straight to P220 from too coarse a grit and you won't get the scratches out.

What do you sand P220 with?

Random orbital sander with 3 mm orbit or a hand block along the grain. Typical for: Wood before oil, wax or varnish, hardwood furniture, primer for a first smoothing.

What is the most common mistake with P220?

Sanding wood too fine before oiling: from about P320 the pores close and the oil soaks in less well. Dampen the wood slightly before the last pass. Once dry, take off the raised fibres with P220 – then the varnish will not turn rough.

Not sure P220 is right?

The finder asks about material, machine and goal – and tells you the grit and product.

Start the abrasive finder →