Skip to content
KORNDEX – Home
P800KORNDEX

Wet sanding abrasives PRO SHEET 230 × 280 wet

Waterproof sanding sheet 230 × 280 mm – for wet sanding paint.

PRO SHEET 230 × 280 wet: Wet sanding abrasives for Car & paint, Primer coat and Plastic. Grits: P400 to P2000.

Use:
wet / dry
Abrasive grain:
Silicon carbide

€19.90

incl. VAT, plus shipping · €0.80 / pc

Grit

After P800 comes

Quantity

The larger the pack, the cheaper: up to 12% less per piece.

In stock · Delivery 3–5 working days (DE) · free shipping from €49

How many pieces do you need?
Questions? Call: +49 (0) 6184 99 47 130
Compare with others

  • Waterproof
  • Even scratch pattern
  • For clear coat and primer surfacer
  • Can be cut to size

The film

Wet abrasives on film

Waterproof – for clear coat and primer surfacer.

Find the right abrasives

PRO SHEET 230 × 280 wet – suitable for Car & paint, Primer coat, Plastic

PRO SHEET 230 × 280 wet: which grit for which finish?

The grits of this product and what they are typically used for. From heavy stock removal to a perfect surface.

View the grit guide
  • P400

    Primer / paint

    Smoothing primer surfacer and primer, preparing for the top coat.

  • P600

    Paint preparation

    Keying paint for a perfect finish before the top coat.

  • P800 (current grit)

    Keying paint

    Matting top coat, sanding between clear coats.

  • P1000

    Fine matting

    Clear coat before recoating, fine sanding plastics.

  • P1500

    Paint defects

    Remove dust nibs and runs in the clear coat.

  • P2000

    Before polishing

    Before polishing, wet, with light pressure.

Your next sanding step: After P800 comes P1000 – available in this product.

PRO SHEET 230 × 280 wet: technical details

Dimensions
230 × 280 mm
Abrasive grain
Silicon carbide
Backing
Paper, latex-reinforced
Use
wet / dry
Machine
Hand sanding

Anything unclear – size, grit, machine? Ask a question about PRO SHEET 230 × 280 wet

PRO SHEET 230 × 280 wet: description

The classic wet sanding sheet for clear coat, primer surfacer and plastics: latex-reinforced paper that doesn’t go soft in water, and silicon carbide grain for a fine, even scratch pattern. From P400 to P2000 – from paint prep through to the finish before polishing.

Good to know

  • Sand wet?

    Water binds the dust, cools and flushes away the removed material – the scratch pattern gets finer and the abrasive does not clog. Squeegee the surface now and then to check the result.

    More in the guide: Sand wet?
All 12 variants as a table
All 12 variants of PRO SHEET 230 × 280 wet
Item no.GritQuantityPriceAvailable
PRO-SHEET-230-1P40025 pcs€19.90€0.80 / pcyes
PRO-SHEET-230-2P40050 pcs€34.90€0.70 / pcyes
PRO-SHEET-230-3P60025 pcs€19.90€0.80 / pcyes
PRO-SHEET-230-4P60050 pcs€34.90€0.70 / pcyes
PRO-SHEET-230-5P80025 pcs€19.90€0.80 / pcyes
PRO-SHEET-230-6P80050 pcs€34.90€0.70 / pcyes
PRO-SHEET-230-7P100025 pcs€19.90€0.80 / pcyes
PRO-SHEET-230-8P100050 pcs€34.90€0.70 / pcyes
PRO-SHEET-230-9P150025 pcs€19.90€0.80 / pcyes
PRO-SHEET-230-10P150050 pcs€34.90€0.70 / pcyes
PRO-SHEET-230-11P200025 pcs€19.90€0.80 / pcyes
PRO-SHEET-230-12P200050 pcs€34.90€0.70 / pcyes

Prices incl. VAT, plus shipping.

PRO SHEET 230 × 280 wet in practice

When
For wet sanding on paint: clear coat, primer and plastic, when the scratch pattern needs to be especially fine and even.
How to go about it
Soak the sheet in water for a few minutes, put it on a sanding block and sand in straight passes with plenty of water. Squeegee the surface again and again to check it.
Better something else
On larger surfaces, film or foam discs on a random orbital sander are faster and more even.
Tip from the workshop
Cut the sheet into thirds or quarters: a smaller piece on the block is easier to control and lasts longer.

Complete sanding processes

Example: Car & paint – from the first pass to the finish.

Go to Car & paint

Finish set for high gloss

For the finish before polishing – film, foam and wet sanding sheets.

  • Ultra-fine grits
  • Machine and hand
  • Cheaper than buying separately

€59.90

incl. VAT, plus shipping

View the set → Finish Set
KORNDEXFINISH SETKORNDEX

Goes well with PRO SHEET 230 × 280 wet

  • KORNDEX

    Hand sanding block 70 × 198

    Hand sanding block with hook and loop and extraction port – for strips and rolls.

    €14.90

    incl. VAT, plus shipping

  • KORNDEX

    SOFT FINISH

    Foam sanding pad Ø 150 mm – perfect results. Every time.

    €14.90

    €1.49 / pc · incl. VAT, plus shipping

FAQ about PRO SHEET 230 × 280 wet

Which grits does PRO SHEET 230 × 280 wet come in?

PRO SHEET 230 × 280 wet comes in 6 grits: P400, P600, P800, P1000, P1500 and P2000.

Which pack sizes are available?

PRO SHEET 230 × 280 wet comes in packs of 25 pcs and 50 pcs. The price per piece is shown with every pack.

Do I need a machine for PRO SHEET 230 × 280 wet?

No, PRO SHEET 230 × 280 wet is made for hand sanding.

Can PRO SHEET 230 × 280 wet also be used dry?

Yes, PRO SHEET 230 × 280 wet can be used both dry and wet.

What is PRO SHEET 230 × 280 wet suitable for?

For Car & paint, Primer coat and Plastic.

When should I use PRO SHEET 230 × 280 wet?

For wet sanding on paint: clear coat, primer and plastic, when the scratch pattern needs to be especially fine and even. On larger surfaces, film or foam discs on a random orbital sander are faster and more even.

How do you use PRO SHEET 230 × 280 wet?

Soak the sheet in water for a few minutes, put it on a sanding block and sand in straight passes with plenty of water. Squeegee the surface again and again to check it. Cut the sheet into thirds or quarters: a smaller piece on the block is easier to control and lasts longer.

On shipping, invoices and returns: general shopping questions →

Guides for PRO SHEET 230 × 280 wet

  • Random orbital sander on a wing, sanding dust on the paint

    Car & paint

    Wet or dry sanding: which grit when?

    Dry with dust extraction up to P600, wet from P800 on paint – and what the water really does.

    Read · 2 min
  • Fine sanding plastic by hand with a foam sanding pad

    Plastic & resin

    Restoring headlights: which grit?

    Wet sand from P800 to P2000, then polish – and seal afterwards, or the lens will be cloudy again after one summer.

    P800 → P1000 → P1500 → P2000

    Read · 1 min
  • Sanding discs, sheets, a roll and sanding sponges next to a painted panel, wood, steel and plastic

    Plastic & resin

    Sanding 3D prints: grits to remove layer lines

    Layer lines on PLA, PETG and resin: coarse with P120 to P180, then up to P400 – and wet from P600 so the plastic doesn’t melt.

    P120 → P180 → P240 → P320 → P400 → P600 → P800

    Read · 1 min

Product safety

Information under the EU General Product Safety Regulation (GPSR). What that means →

Manufacturer

Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de
Brand
KORNDEX
Product
PRO SHEET 230 × 280 wet · Wet sanding abrasives
Item numbers
PRO-SHEET-230-1 to PRO-SHEET-230-12 (all 12 in the item table)

Warnings and safety information

  • Dust and eye protection

    Sanding creates dust. Work with dust extraction; otherwise wear respiratory protection (at least FFP2) and safety glasses. Dust from wood, metal, paint and plastics can be harmful to health; old paints dating from before the 1990s may contain lead.

  • Fit and speed

    Only fit hook-and-loop abrasives centrally on an undamaged backing pad of the same size and line up the holes. Do not exceed the maximum permitted speed of the machine.

  • Damaged abrasives

    Do not use torn, creased or chipped abrasives – they can come loose while running. Check the hook-and-loop surface of the backing pad regularly as well.

  • Sparks and heat

    Sanding metal produces sparks and hot debris. Do not sand near solvents, paint residues or other flammable materials, and do not leave the contents of the dust bag standing open.

  • Wet or dry

    Only sand wet where the technical data state “Use: wet” or “wet and dry”. Mains-powered machines are not approved for wet sanding unless their manufacturer expressly permits it.