Sanding discs PRO CUT 150
Professional sanding disc Ø 150 mm – maximum stock removal.
PRO CUT 150: Sanding discs for Car & paint, Primer coat, Wood and Metal. Fits: Random orbital sander. Grits: P80 to P600.
- Diameter:
- 150 mm
- Attachment:
- Hook and loop
- Hole pattern:
- Multihole (15 holes)
- Use:
- dry
- Abrasive grain:
- Aluminium oxide
€24.90
incl. VAT, plus shipping · €0.50 / pc
In stock · Delivery 3–5 working days (DE) · free shipping from €49
How many pieces do you need?
- High stock removal
- Long service life
- Even scratch pattern
- For random orbital sanders
- For wood, metal, paint and filler
The film
Sanding discs on film
High stock removal, long service life, 15-hole pattern – dry and wet.
PRO CUT 150 – suitable for Car & paint, Primer coat, Wood, Metal
PRO CUT 150: which grit for which finish?
The grits of this product and what they are typically used for. From heavy stock removal to a perfect surface.
Your next sanding step: After P240 comes P320 – available in this product.
PRO CUT 150: technical details
- Diameter
- 150 mm
- Attachment
- Hook and loop
- Hole pattern
- Multihole (15 holes)
- Abrasive grain
- Aluminium oxide
- Backing
- Paper, C-weight
- Use
- dry
- Machine
- Random orbital sander 150 mm
Terms explained
Anything unclear – size, grit, machine? Ask a question about PRO CUT 150
PRO CUT 150: description
The all-round disc for your random orbital sander: sharp aluminium oxide grain on tear-resistant paper, with hook-and-loop backing and a 15-hole pattern for clean dust extraction. From body filler and wood to paint prep – consistent in every grit, with a long service life.
Available from P80 to P600, in packs of 10, 50 and 100. For workshops that get through a lot: the 100-pack has the best price per disc.
Good to know
Why multihole?
The holes are spread across the whole disc. So it fits backing pads with 6, 7, 8 or 15 holes without having to be lined up exactly – and the dust is extracted where it is created. The disc clogs more slowly.
More in the guide: Why multihole?
Helps against
- Scratches from the coarse grit are still there
- The filler repair shows through
- The disc no longer cuts, it smears
- The rust comes back in the same spot
- Blisters in the paint over a filler repair
- The discs curl or do not lie flat
- The wood turns blotchy when stained
- Stainless steel tarnishes: blue and golden discolouration
- Epoxy resin smears and clogs the disc
All 21 variants as a table
| Item no. | Grit | Quantity | Price | Available |
|---|---|---|---|---|
| PRO-CUT-150-1 | P80 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-2 | P80 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-3 | P80 | 100 pcs | €44.90€0.45 / pc | yes |
| PRO-CUT-150-4 | P120 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-5 | P120 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-6 | P120 | 100 pcs | €44.90€0.45 / pc | yes |
| PRO-CUT-150-7 | P180 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-8 | P180 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-9 | P180 | 100 pcs | €44.90€0.45 / pc | yes |
| PRO-CUT-150-10 | P240 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-11 | P240 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-12 | P240 | 100 pcs | €44.90€0.45 / pc | yes |
| PRO-CUT-150-13 | P320 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-14 | P320 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-15 | P320 | 100 pcs | €44.90€0.45 / pc | yes |
| PRO-CUT-150-16 | P400 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-17 | P400 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-18 | P400 | 100 pcs | €44.90€0.45 / pc | yes |
| PRO-CUT-150-19 | P600 | 10 pcs | €12.90€1.29 / pc | yes |
| PRO-CUT-150-20 | P600 | 50 pcs | €24.90€0.50 / pc | yes |
| PRO-CUT-150-21 | P600 | 100 pcs | €44.90€0.45 / pc | yes |
Prices incl. VAT, plus shipping.
PRO CUT 150 in practice
- When
- Whenever one disc should cover almost everything: body filler, wood, primer and paint preparation on a random orbital sander with a 150 mm pad.
- How to go about it
- Fit the disc so its holes line up with the pad, switch on dust extraction and keep the machine flat. Start with the coarsest grit you need and do not skip a step.
- Better something else
- If the disc clogs quickly in primer or filler, PRO NET 150 is the better choice. For clear coat and the finish before polishing, use PRO FILM 150.
- Tip from the workshop
- A disc is worn out when it glides instead of cutting – not only once it tears. Changing in time saves effort and prevents swirl marks.
Complete sanding processes
Example: Car & paint – from the first pass to the finish.
Matching machines

Random orbital sander 150 mm, 5 mm orbit, 350 W – the machine for our discs.
€149.00
incl. VAT, plus shipping
Car paint starter set
Six grits for paint repair – from body filler to top coat.
- 6 matched grits
- 10 discs of each
- For 150 mm random orbital sanders
- Cheaper than buying separately
€69.90
incl. VAT, plus shipping
Goes well with PRO CUT 150
Hook-and-loop backing pad for random orbital sanders – 15 holes, 5/16" thread.
€18.60
incl. VAT, plus shipping
Soft interface pad Ø 125 or 150 mm – for contours and for mesh discs.
€8.90
incl. VAT, plus shipping
Mesh sanding disc Ø 150 mm – virtually dust-free, sands for longer.
€24.90
€0.50 / pc · incl. VAT, plus shipping
FAQ about PRO CUT 150
Which grits does PRO CUT 150 come in?
PRO CUT 150 comes in 7 grits: P80, P120, P180, P240, P320, P400 and P600.
Which pack sizes are available?
PRO CUT 150 comes in packs of 10 pcs, 50 pcs and 100 pcs. The price per piece is shown with every pack.
Which machine does PRO CUT 150 fit?
Fits: Random orbital sander 150 mm. Attachment: Hook and loop.
Can PRO CUT 150 be used wet?
No, PRO CUT 150 is made for dry sanding.
What has to match my machine?
Compare with your backing pad and machine: diameter 150 mm, attachment Hook and loop and hole pattern Multihole (15 holes). If the hole pattern does not match the backing pad, the machine hardly extracts any dust.
How can I tell the disc is worn out?
When it cuts noticeably slower, the surface gets warm, glossy spots or lumps of dust sit on the disc, or single deep scratches appear. Change it then – not only when it tears.
What is PRO CUT 150 suitable for?
For Car & paint, Primer coat, Wood, Metal and Body filler.
When should I use PRO CUT 150?
Whenever one disc should cover almost everything: body filler, wood, primer and paint preparation on a random orbital sander with a 150 mm pad. If the disc clogs quickly in primer or filler, PRO NET 150 is the better choice. For clear coat and the finish before polishing, use PRO FILM 150.
How do you use PRO CUT 150?
Fit the disc so its holes line up with the pad, switch on dust extraction and keep the machine flat. Start with the coarsest grit you need and do not skip a step. A disc is worn out when it glides instead of cutting – not only once it tears. Changing in time saves effort and prevents swirl marks.
On shipping, invoices and returns: general shopping questions →
Guides for PRO CUT 150
Product safety
Information under the EU General Product Safety Regulation (GPSR). What that means →
Manufacturer
Custom-Automotive GmbHIndustriestraße 2263517 RodenbachGermanyinfo@customwheel.de- Brand
- KORNDEX
- Product
- PRO CUT 150 · Sanding discs
- Item numbers
- PRO-CUT-150-1 to PRO-CUT-150-21 (all 21 in the item table)
Warnings and safety information
Dust and eye protection
Sanding creates dust. Work with dust extraction; otherwise wear respiratory protection (at least FFP2) and safety glasses. Dust from wood, metal, paint and plastics can be harmful to health; old paints dating from before the 1990s may contain lead.
Fit and speed
Only fit hook-and-loop abrasives centrally on an undamaged backing pad of the same size and line up the holes. Do not exceed the maximum permitted speed of the machine.
Damaged abrasives
Do not use torn, creased or chipped abrasives – they can come loose while running. Check the hook-and-loop surface of the backing pad regularly as well.
Sparks and heat
Sanding metal produces sparks and hot debris. Do not sand near solvents, paint residues or other flammable materials, and do not leave the contents of the dust bag standing open.
Wet or dry
Only sand wet where the technical data state “Use: wet” or “wet and dry”. Mains-powered machines are not approved for wet sanding unless their manufacturer expressly permits it.


